does any one know what kind of paint is used on some of the crankbaits with a pearl flashy look to them . it looks like the pearl moves as you move the crankbait?
thats not good. paint is not sticking , over spray will look like powder. are you puttin on a wet coat of paint. mite have to much air pressure that will cause over spray? what are you using for a base coat
i mix my paint in 4 oz squirt bottles. i have every color i use premixed. when i need a color just squirt a little in cup and spray. never had any go bad.
i use this mold a good bit i have not had any problems. are you using the bottom pour pot? i leave my mold sit on top of lead pot as it heats up so it is good and hot when i start to pour
thanks again Redg8r i am tryin to come up with a line of new modern style stick baits more life like. i have been making them for last 20 yrs from wood. i have designed a bait but needs to be plastic for special effects. maybe ill have to start injecting my own
i hae carved out my body then split it and make a wire form to inlay inside of bait then epoxy the two half together on the softer woods. works very well