red ranger

I want to paint the KVD sexy shad on series 5 crank bait. This is the only color I want to paint for now,I dont want to wast money on colors I wont use.If some one could tell me what colors to order from Auto Air. Thanks.

I use a bottom feed air brush for my hollow swimbaits 25% thiner and add the retarder untill the cob webbing stops thats what i do.if you add to much retarder it wont dry fast enough and mess up the scales when you remove the netting

I make worm mold and I want to make a lead mold what shore hardness shoud I use to get the most jigs out of the mold befor the silicone burns up.

where do you buy pearlized pouder for createx i did not see it on there web site. i put blue super hi lite plastic coloring in the devcon it worked good for the top coat,but i want to make my own prarlized. colors

Thanks once again all of you are so helpfull,as I learn more I hope I can help olhers like me

thanks for all of the advice. i got a little better tonight with the cup it still wants to push the paint some ,so i used a toothpick for lines and making firetigger lines worked great. i all so used a 3/16 wood dowl for kill spots. has any one tryed using a sharpie

im inexperienced with createx but i do paint hollow belly swim baits with the paint lure craft with out any problem. no matter what i do the paint is splatering i have a paasche vl0907daul action . i cleaned all parts all parts in good working order. tryed using the paint stright, thin with water not much looked like milk. a wide range of air pressure 50 psi seems to splater the least. paint dosent splater as bad on paper as it dose on a hard bait. painting scales with netting isnt to bad but fine lines suck . i al lso tryed moving my hand at diferent speeds a fast movement no splater but i dont think you can paint detail a the speed i was moving the brush at least i cant . HELPPPPPPPPP me please.

lock tight gel its the best all so if you have a weed gard thats to soft for heavy cover put a little gule up the weed gard about 1/8" this will realy stiffin it up if you want it soft again just break it up . I have done this for years save alot of snaging i use wg30 and always trim out 5 to8 gards from the center

does any one know where to get or make the hub for these skirts I want to make myself there nothing new northland put these typ skirts out about 10 to 15 yr ago i use to gule living rubber to a skirt colar silicone dosent work very good

I made more of these molds

send $ 21.00 to paypal I will mail them out same day if payment is made before 3.30 PM I'll PM you my email

I have 5 molds left 8.00 ea flat rate shipping 5.00