Pike catcher
-
Posts
24 -
Joined
-
Last visited
Content Type
Profiles
Articles
TU Classifieds
Glossary
Website Links
Forums
Gallery
Store
Everything posted by Pike catcher
-
I had a look inside and a nut was loose it seems to of done the trick thanks for all your help lads
-
Yes i tried neat water still no good. the air brush is brandnew but not a name brand its my first go at it .I also have another airbrush with a 0.35 tip ad that is fine but not much good for detail
-
I just tried to paint a lure i made. I purchased some createx designed for airbrushing but i carnt get it to come out of the 0.3 tip. I also tried water just to see and still nothing. Any ideas lads?
-
I will put new hooks on it those were some old i used for testing -
My first finished jerk baite
-
I just wondered what you guys use to clamp your lures in when you paint them. i was thinking of buying a fly tying vice but i dont want to waist my money if there not up to the job . anyone got any ideas
-
Hello people i need your help i have just ordered my first airbrush but need some advice on what paints to use. Im in the uk so if you no of any shops over hear please let me no. Pike catcher
-
Thanks for your help lads:yay:
-
I was talking to a man at the weekend who uses air brushes with a co2 ait tank. I just wondered if any of you guys do the same if so does it work ok?
-
My pilot holes are to small but i have ordered some stainless eyes now. Do you guys glue your eyes in.
-
Im propper gutted i spent all week making my oak glide baite done my first good paint job just about to put some envirotex on and snapped the screweye of the front. I think i need to order some stainless ones:flame:
-
Thanks for all your help guys i was just about to take our microwave apart a steel the motor from it.
-
Thanks kingfisher I have been looking at a badger airbrush and compressor package for about
-
Nice one. quick question when you use envirotex light do you use a drying wheel? -
Im going to buy my first airbrush but not sure what i need. what brand should I be looking for and what do need to paint the detail pattens on lure bodies:popcorn:
-
Helllo mart nice pearch does that spinner cast ok on that multiplier?
-
Thanks Bob
-
I watched a video on u tube of aguy making a glide bait when it came to painting the lure body he put envirotex light on before painting.Is that a normal way of doing it?
-
At the moment i dont have a drying wheel but i do have the envirotex now. Is there any way i can dry it and still get a good finish?
-
:yay:Thanks mate can i dry it with a hairdryer
-
I have just orderd some envirotex light what is the best way to apply it and will it go on enamal paint?
-
:yay:Thanks guys that lure building site was just what i needed im still not to sure about a few things but i will get there.
-
Hello people im trying to make my own jerk baits from wood but i need help. 1.what do you seal the wood with 2.where do you put the weights and what do you seal the holes with 3.what do you prime the wood with 4. what is the best paint to use
-
:)Hello people im trying to make my own lures for pike fishing but i need some advise. 1.where do you put the weights in the body? 2.what do you seal and prime the body with? 3.what type of paint recomend i use?