[0.3 Airbrush Tip]

Have you checked to see if the nut that holds the needle is tight? Like was mentioned earlier, if the nut isn't tight then the needle isn't moving when you pull the trigger. If the nut is tight then it seems your brush is clogged up. Have you tried taking it apart and cleaning it. Or soaking it in cleaner? If it's a brand new brush you might want to exchange it. It should at least spray fresh out of the box.

I had a look inside and a nut was loose it seems to of done the trick thanks for all your help lads

[0.3 Airbrush Tip]

Something's either dirty or not tight enough. You could also have a bad seal in the air valve, that'll allow air to come up through the handle of the brush instead of the tip. Is the air coming from the front or back of the cup? If it's from the front, it's something either dirty or loose in the nozzle assembly. If it's from the back it's the valve.

Pike, did you mean you tried straight water and it didn't spray?

Yes i tried neat water still no good. the air brush is brandnew but not a name brand its my first go at it .I also have another airbrush with a 0.35 tip ad that is fine but not much good for detail

[0.3 Airbrush Tip]

I just tried to paint a lure i made. I purchased some createx designed for airbrushing but i carnt get it to come out of the 0.3 tip. I also tried water just to see and still nothing. Any ideas lads?

[Lure Clampimg]

I just wondered what you guys use to clamp your lures in when you paint them. i was thinking of buying a fly tying vice but i dont want to waist my money if there not up to the job . anyone got any ideas

[Paints]

Hello people i need your help i have just ordered my first airbrush but need some advice on what paints to use. Im in the uk so if you no of any shops over hear please let me no. Pike catcher

[Gutted]

Thanks for your help lads:yay:

[CO2]

I was talking to a man at the weekend who uses air brushes with a co2 ait tank. I just wondered if any of you guys do the same if so does it work ok?

[Gutted]

My pilot holes are to small but i have ordered some stainless eyes now. Do you guys glue your eyes in.

[Gutted]

Im propper gutted i spent all week making my oak glide baite done my first good paint job just about to put some envirotex on and snapped the screweye of the front. I think i need to order some stainless ones:flame:

[Envirotex light]

Thanks for all your help guys i was just about to take our microwave apart a steel the motor from it.

[New airbrush]

Thanks kingfisher I have been looking at a badger airbrush and compressor package for about

[New airbrush]

Im going to buy my first airbrush but not sure what i need. what brand should I be looking for and what do need to paint the detail pattens on lure bodies:popcorn:

[Wood sealent]

Thanks Bob

[Wood sealent]

I watched a video on u tube of aguy making a glide bait when it came to painting the lure body he put envirotex light on before painting.Is that a normal way of doing it?

[Envirotex light]

At the moment i dont have a drying wheel but i do have the envirotex now. Is there any way i can dry it and still get a good finish?

[Envirotex light]

:yay:Thanks mate can i dry it with a hairdryer

[Envirotex light]

I have just orderd some envirotex light what is the best way to apply it and will it go on enamal paint?

[Jerk baits]

:yay:Thanks guys that lure building site was just what i needed im still not to sure about a few things but i will get there.

[Jerk baits]

Hello people im trying to make my own jerk baits from wood but i need help.

1.what do you seal the wood with

2.where do you put the weights and what do you seal the holes with

3.what do you prime the wood with

4. what is the best paint to use

[Jerk baits]

:)Hello people im trying to make my own lures for pike fishing but i need some advise.

1.where do you put the weights in the body?

2.what do you seal and prime the body with?

3.what type of paint recomend i use?