Jump to content

BigBaitkid

TU Member
  • Posts

    21
  • Joined

  • Last visited

BigBaitkid's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. Sorry for the delay. Heres the pics. Put a Green Pumpkin Paca Craw for comparison.
  2. I will try to post up some pics so that you guys can get a better look at it. Thanks for the help so far.
  3. I have been using this color in the Berkley Crazy Legs Chigger Craw line called Breen and was wondering if anyone has an idea as to how to pour this color. When it is in the water is appears green and when it is pointed towards the sun it has a dark orange/red color to it. It is a really unique color but I have no idea how they created this color. I was thinking pouring a dark orange color first then coating it with a greenish color. Can anyone help me out as to how I might be able to achieve it? http://www.tacklewarehouse.com/Berkley_Powerbait_Crazy_Legs_Chigger_Craw/descpage-BPCLCC.html#multiview
  4. I have recently been making some balsa flat sided crankbaits. I would like to know your guys opinions on these things. - Should I use egg sinkers and put the screw eyes inside and epoxy it? - Do any of you pour hot lead inside your balsa crankbaits? - Also i always hear people say to use a 1/8oz egg sinkers for the belly weights and I was wondering how many of you actually have success just using a 1/8oz egg sinker for the belly weight and have a true running crankbait. -My last question Is for those of you who are experienced at making flat sided cranks. The ones I have made always seem to only run true at slow speeds. Are there any of you who can make them run true at all speeds and are there any tips you guys can give me? Thanks in advance, BBK
  5. Devcon is very easy to find just go to any hardware store you should be able to find it. Not to sure about Enviro Tex but Devcon is great to use just gotta work fast to put it on.
  6. I have been using Devcon 2 ton. Where could I get a drying wheel?
  7. I have been using Devcon 2 ton. Where could I get a drying wheel?
  8. I have been struggling putting on the top coat for some of my 2 jointed jerkbaits. I have been drying them by hanging them on racks but the bottom always end up being uneven or dripping. I searched back and all it did was confuse me more. I also seen that some people use auto clear for top coating. I am really struggling and need help.
  9. Thanks for the Advice Matt means alot to hear it from you.
  10. I'm working on this bait and I would like to know if I should cut down this bait to a 4 piece or stay to a 3 piece.
  11. Would it work with poplar or is it better suited for Tuff board?Also have you found any hinges that are stronger and are there any that would fit for smaller baits?
  12. Rixen's comment was funny. Almost done carving out my first swimbait!

  13. Rixen's comment was funny. Almost done carving out my first swimbait!

  14. Rixen's comment was funny. Almost done carving out my first swimbait!

×
×
  • Create New...
Top