orionn1

I tried spraying Dick Nites topcoat clear I was using 5-8psi and when I spray it came out like cotton candy. I laid down ok and I am letting dry. Is it suppose to come out like that when you spray?

lol i found in on page 23 in one of my old post looking for is this past year.

There was a post with a picture of a lure that had the perfect clear coat with a yellow stripe down the side. if was set in a background of rocks I think. Does these ring a bell anyone? is it still on the site. It was like a sp pointer I think?

where is the best place to get foil from?

Looking for a silver paint super shiny. Right now I use createx paints and auto air aluminum, and metallic. They are just not the silver That I am looking for. I would like something that looks like the sp pointer 100 sardine lucky strike lures. Any suggestions? Do you guys mix or add to get that almost mirror like look? thanks rob

cool thanks ben

Rayburnguy, what type of paints are you using? It doesn't come off when you wash it? I am new to airbrushing and topcoating. I have heard of heat setting, is that just heating with a heat gun? thanks

Centralsteve I would call them and see if you can get that %10 unless you already got a better deal. they treated me well.

I got mine from here. http://www.chicagoairbrushsupply.com/airbrushes1.html I actually order a bottom feed, which never showed up. After two weeks I called them and they apologized. I ask it I could switch to the Iwata Eclipse HP-CS Gravity Feed Airbrush Model ECL4500 And I asked since it was xmas could I get it for the same price as the bottom feed which at that time it was on sale for $89 I believe and they agreed. I ended up receiving the small gravity feed airbrush so I call chicagoairbrush to return it and request the correct (large gravity feed). The day after I had ordered the original airbrush (the bottom feed) they did a free shipping deal so I asked for that too, I also realized that I needed a hose which I asked if they could throw that in too again they agreed. So it was my fortune that the first airbrush never came. at that time it was on sale from 205 to $119. So I got some huge savings for their mistakes. point being they were very accomdating on the customer service side and threw in some huge discounts. hope this helps

Has anyone used any of these products for top coating http://www.aeromarineproducts.com/

dumb question but what is heat setting? thanks

airbrushextreme is a creative memories hole punch?

Has anyone used automotive clear? Is it hard enough to replace epoxy such as d2t?

I click on your link but can't find an unpainted lure section? regards rob

I want to paint with the following holographic glitter http://www.paintwithpearl.com/flakestore.htm I guess I have to mix with a clear coat. Any suggestion on the clear coat paint to use? And then I would have to cover with d2t right?

When using powder water 1. I airbrush a base coat (white, blue , green whatever) should I let it dry 24 hours before baking? And 2. Do I have to bake it before putting on another color over the base coat? If th

Thanks rotorhead, do you have picture of your setup?

Here is my first attempts at airbrushing and clear coating. I used d2t I included my rotating device. I thought it would be go to see what other people have setup to rotate their lures. It is a rotissere from a bbq , I used electrical tape to tape on alligator clips but I am not really happy with it. When I clear coat leadheads as they rotate over they kind of flop over causing the whole device to become unstable over time. It actually flipped over one time ruining my heads and lures. So any ideas would be great and with pictures and maybe start a sticky. I would like to see what other people have out there I was thinking about using d2t to attach the alligator clips and I also want to see how I can make it longer to be able to attach more lures and leadheads at the same time. Fyi I got about a 150 paint brushes from michaels for $6.99 picture attached

I haven't seen it ask but can you thin d2t to get more working time with it?

I airbrushed my lure and then coated with d2ton. Lure was looking sweet and then my rotating machine got knocked over and scuffed up my undried lures. They have some minor scratches. Can I airbrush over the clear coat now that it is dry and then recoat with d2ton? robert

thank dave

Hey Rodney, what type of filter should I look for then? you said you took some off a roll? thanks

airbrushextreme I have two questions for you. I just bought some createx paint and want to start painting my leadheads. Should I powder coat my leadhead with a base coat of white then bake it then airbrush with the colors I want and then use devcon to coat? Or airbrush the base white? Two you commented on this holographic lure http://www.tackleunderground.com/community/topic/20582-holographic-paint/ that it was ppg paints but I can't find the company when I google it. any help thanks robert

Two questions for you. I just bought some createx paint and want to start painting my leadheads. Should I powder coat my leadhead with a base coat of white then bake it then airbrush with the colors I want and then use devcon to coat? Or airbrush the base white? Two you commented on this holographic lure that it was ppg paints but I can't find the company when I google it. any help thanks robert

I am looking for the thread with the question with the hard bait that had the prism color? anyone remember that thread? It looked awesome wanted to show a friend the picture thanks I think it was in the 5 page or 4th maybe rob