Jump to content

OSScustom

TU Member
  • Posts

    44
  • Joined

  • Last visited

  • Days Won

    1

OSScustom last won the day on March 10 2012

OSScustom had the most liked content!

About OSScustom

  • Birthday 10/12/1968

Profile Information

  • Location
    New Jersey
  • Interests
    Fishing, Fishing and fishing

OSScustom's Achievements

Newbie

Newbie (1/14)

2

Reputation

  1. OSScustom

    EGP Craw

    Electric Green Pumpkin Craw
  2. OSScustom

    Red Craw

    Red Craw
  3. OSScustom

    Honey Craw

    New Honey Craw pattern.
  4. Nathan, I ordered yesterday myself along w/ a nail dryer from ebay. Just like you, this works as advertised, I will upgrade the curing system and crank them out. I can paint 20 baits a day but, epoxy topcoating really slows the process down.
  5. Just read through the Solarez website, They say it requires UVA to cure the resin, which can be found in any nail dryer used for salons. Might be a less expsenive route to take. I just ordered a cheap one and will give it a try when it arrives. Will post the results...
  6. OSScustom

    Bull Frog Buzz Jet

    Thanks, taking it out tomorrow to see what I can do with it.
  7. OSScustom

    Bull Frog Buzz Jet

    Just Finished. Pattern worked great on the 2.5, Thought the bass might kill this one also.
  8. OSScustom

    Trio of gills

    Looks like you got it. Good job
  9. OSScustom

    Bullfrog

    The second spot are the frogs ear.
  10. OSScustom

    Bullfrog

    First attempt. More variations on the table.
  11. I use christmas ornament hangers, the good ones with the green plastic coating and carburator springs for R/C cars I picked up at a local hobby shop. The springs have an open hook end and a closed loop. these two items allow me to adjust tension as necessary to ensure the bait does not flip-flop while turning.
  12. Everyone covered brushing, so I will throw my two cents in on mixing. I puchase D2T in the 9oz bottles, buy the cheap medicine dispensing syringes at Wal-mart ( the ones with the bottle plug). These little kits are about 2 bucks and will ensure you get equal amounts of epoxy and hardener every time and also helps you work clean. I tried the dual tube at first but could not always get a consitent measurement and ended up wasting alot of epoxy. To cover two medium lures (under 4 inches), I draw enough epoxy to fill the syringe to the top of the "L" in 1ml after I push the air and excess back into the bottle add 2 small drops of DA and then start brushing. ( read the guys above. They got it I can add nothing) Hope this helps!
  13. OSScustom

    perch

    Third perch pattern. It keeps morphing every time I paint it.
×
×
  • Create New...
Top