ndietiker
-
Posts
6 -
Joined
-
Last visited
ndietiker's Achievements
Newbie (1/14)
0
Reputation
-
can you send me a picture of the swimbait your talking about ?
Also I can make your life easier about eyes no matter whos you use I told Nova about it and its simple ....no hard crap and the only way you can get the eyes off is basically peel the eyes off with the plastic coming off also simple to do just need some loctite gel spuer glue and a little secret I havnt shared ...you will want ...
-
Thanks alot guys...I will give spike it a call
-
Looking for a paint to use on soft swimbaits tried createx but it rubs right off
-
Yep, more than two weeks of cure time
-
Checking to see if anyone has had any issues with the durability of the new clear coat. I had a couple guys tell me that the clear and paint was coming off some baits I used it on. I used three coats on the baits.
-
Looking for an eye that I could stick into bait after it is poured. I am experimenting with a swimbait similar to Osprey brand. I can't get the 3D eyes to stay in the right spot when pouring. Do you guys know of anywhere to get an eye like I am describing. Thanks.
-
Got some of the new clear coat in a couple of weeks ago. It sprays fine but I wouldn't use anything smaller than .5mm. I am using my extra paasche with a #3 needle and tip and I don't need to thin it. My only issue I have seen is I did some clear baits with it and it seems to give off a yellow hue, it has only been 4 days so hopefully it is not fully cured and that will go away we will see. Also if you are going to brush it on be careful what type of brush you use. I was using a black sythetic brush and the black color bled into the clear and ruined a couple baits.
