eastman03
-
Posts
442 -
Joined
-
Last visited
-
Days Won
26
Content Type
Profiles
Articles
TU Classifieds
Glossary
Website Links
Forums
Gallery
Store
Status Replies posted by eastman03
-
Hello Eastman,
Thought I'd share these pictures that show the method I've been using to add weight to my thru wire baits. These are strips of lead that are made to fit tightly in the slot much like the wood strip method that you commented on. I made these by pouring lead into a metal Altoids can about 1/8" deep. Then cut them into strips with my skill saw. It's a nice alternative to drilling holes and patching with filler. It also ensures that the weight is perfectly centered.
Take care! John
-
Yea I hear you. It's tough to know sometimes when I'm making prototypes for myself where to drill the lead before hand. This is the result.
-
-
Hello Eastman,
Thought I'd share these pictures that show the method I've been using to add weight to my thru wire baits. These are strips of lead that are made to fit tightly in the slot much like the wood strip method that you commented on. I made these by pouring lead into a metal Altoids can about 1/8" deep. Then cut them into strips with my skill saw. It's a nice alternative to drilling holes and patching with filler. It also ensures that the weight is perfectly centered.
Take care! John
-
That's fantastic John! Thanks for the tip! I like it! I will try this method. One thing I struggled with is drilling the hole for the lead with the slot in the wood, that takes care of it completely!
Trevor
-
