XFactorTackle

Sold!

Why do so many people feel the need to copy RI on that bait? As mentioned above, there are similar baits that work well. Create your own, do some R&D, in the long run you'll be happy you did. Jeff btw, the owner of RI is on this forum which makes it pretty easy for him to track down guys that are copying his baits.

Not to take away from Zorn in anyway, you might be interested in a new design coming from High Rock Molds. I just talked with Kyle at High Rock Molds, here is the info he gave me: It will be a "small scale" production machine, cost will be $17k - $20k and molds will be $1000 - $1500 ea. Cool down time per mold will be approx 30 seconds. Mold costs are reduced because they don't have water ports in them, instead the plates that hold the mold will be cooled (there's a technical name for them, I don't remember it). Kyle could explain it better then I can but I think you get the idea. This system will take up 6 feet x 6 or 8 ft and be on casters so you can roll it around. This will be air fed rather then a pump and will be designed to use a 5 gallon bucket of plastic at a time. For more info, check out his facebook page: https://www.facebook.com/pages/High-Rock-Molds-LLC/1592179457679983

That's great, thanks.

Probably just busy, leave a message and I'm sure one of them will get back to you.

I thought I was jammin with 5 gallons a day =) (on occasion at that, not everyday). Always good to hear from the big guys, keeps us small fry humble. Thanks Josh!

Awesome looking system, nice job. What motor are you using on those stirrers? How many rpm?

What colors are you looking for and how much?

I think your right edgecrusher! I talked to Chris at Ultra Molds today, he said they have a smaller system in the works, along with several other new molds and gadgets. Jeff

I'm surprised more people haven't bought this system, looks pretty innovative to me. Jeff

It might be helpful for guys looking into a tube spliter if you could post pictures of your setup here. Sounds like a good idea to me. Jeff

I have some molds listed here: http://www.tackleunderground.com/tu_classifieds/_/for-sale/several-molds-for-sale-r1129 Several great baits at pretty low prices. There are several others that post regularly on the classified section, usually lots to choose from at good prices. Jeff

Chris is a great guy and offers excellent customer service.

I'm not sure if Calhoun changed their formula or not but I received 2 drums yesterday and when I opened one of them to mix, there was no hardener packed at the bottom and it had a manufacture date of early April. Mixing around during shipping won't allow for hardener to re-suspend into the plastic. Personally, I'm happy with Calhoun. I've gone through 8 drums or so and never had an issue. Jeff

You can always just ask for what you are looking for here or in the "wanted" section. I have some swimbait molds for sale and a couple 3" Trout Worm molds too.

Be patient guys, it takes time, patience and persistence to put together an e-commerce website. Besides, you could always order by phone.

Bob's is up and running: http://www.btsmolds.com/molds/

I forgot to post this link...Here is the bait I'm talking about: http://www.basstackle.com/product_p/623-1-1.htm