wishn4fishn
-
Posts
232 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Articles
TU Classifieds
Glossary
Website Links
Forums
Gallery
Store
Everything posted by wishn4fishn
-
MF has some fluorescent glitters. Haven't used them though.
-
Thanks. I take the bar off my dual injector that connects the two injectors. Then just alternate pushing each one down till the molds full. -
I like the arky head myself and I make them on the poison swing head. The blade thumps the head good on the arky to the point it's wearing down the lead.
-
Bass tackle has a couple craws with a different body but the same claws.
-
For bass baits .015 and .040 I like .025 and use the .040 to accent.
-
I like spike it glitter. They have a .025 size that nobody else has.
-
My brush hog mold has one cavity on each side of the spru. Single cavities work good. I've done it on 4 cavity molds but ya have to use a old piece of spru to block some cavities. -
No heat. I start with a cold mold. It goes pretty easy.
-
One more thing you usually have to make the outside color quite a bit darker than normal because it's just a skin coat and the inside color will come through
-
Don't know the exact temps but I like the color I'm pouring a little thicker so it doesn't just run into the cavities. I do this with a two cavity. It has one cavity on each side of the spru.
-
You are correct Mark
-
It's a injection mold. I pour the green pumpkin into the spru hole and inject the chartreuse.
-
I have the same problems with the 1/4oz. I don't use soft lead I actually use bird shot. It's a 95% lead to 5% aninimity
-
Fshnh2 I mostly use the 1/4 oz. with a size 3 willow. I run a Do-It 3.75" essential series swimbait on it or a 3.8" keitech variation on there. I mostly fish it along weed lines and lay downs.
-
I always have one tied on. I flat tore them up from March thru October last year. Bass hammered it when they hit it.
-
Well guys I tried everything you suggested and still can't get this thing to shoot right. It was a little better with a different color.
-
Thanks guys. Gonna give what you said a try and see what happens.
-
I have the top inject 639 and for the life of me I cannot get the ribs to fill out right. I have tried heating the mold, shooting the plastic hotter and cooler, and holding pressure for various amounts of time, and injecting at different speeds.
-
I use both. I made my plate so I get a half out of each side of the mold. I use the plate mainly to save plastic. Some molds though require the dual injector to do laminates. Like stated it is faster.
-
Lureworks sparkle violet
-
-
-
-
I think you injected the second color to fast and the second color lifted and shot around the half already in the mold. That would explain the lack rings and the black being flat.
