seagull

We use 1/16" or 1.2 mm thick lexan or aliminiun for bibs here in Australia for small lures and up to 1/8" for or heavier lures for chasing Cod.Big lures always get bibs pinned in postition aswell as glueing.Easy place to find lexan is try your local hardware store and use the flat skylight sheets that you would put in your roof for your shed or patio.These are called polycarbonate sheeting same stuff as lexan. Cheerz Seagull

What type of hangers are you using?If your using screw in stainless eyelets dnt drill the hole as deep inject glue then screw the eyelet in so it screws into the timber.Or if your using twisted wires make then a tough longer than the drilled hole pre fit twisted wire dry with out glue.Cut the twisted wire to lenght recheck then inject glue and refit twisted wire twisting it as as you go this should reduce airpockets.You must make shore that the hole that your injecting glue into has glue coming out of the hole.Aftr twisting in hook hanger wipe of excess glue and all should be good. Cheerz Seagull