Jump to content

wootonc

TU Member
  • Content Count

    82
  • Joined

  • Last visited

Everything posted by wootonc

  1. Hello I am new to pouring of soft plastics. I have been making jigs buzz baits spinner baits shakey heads for about 6 years now. I am looking at getting into the injection of plastics mainly swim baits grubs and finesse worms. Looking for do's and don'ts before I wast a lot of money like I did when I started making jigs before I found this site. Best places to buy molds plastics and coloring's. Thanks for the help
  2. wootonc

    matzuo hooks

    Does anyone know where we can find Matzuo sickle jig hooks I think the number is 9014 90 degree bend. 1/0 2/0 3/0 seems everywhere I look no one has them. Also would be willing to find a different brand of a sickle hook bought some eagle claw but the gap wasnt as wide as the Matzuo. Thanks
  3. I am looking to make some spinner baits out of titanium wire 3/8 1/2 3/4 in size any recommendation on what size wire i should purchase to use for my wire form. thanks
  4. wootonc

    twin injector

    Looking for a used twin injector with blending block just starting to mess with plastic and looking for a used one to learn with before I put a lot of money into it.
  5. wootonc

    BLADES

    Here is the pic of all the styles in the box if interested I will send what you want have all priced at 225 but will entertain a good offer for all just don't make baits that need these
  6. wootonc

    plum colored plastic

    Looking for someone that could mix some plastic that would match the zoom plum color I want about a quart to start with. shoot me a price and shipping thanks
  7. wootonc

    blades

    These blades for sale bought with a store and dont use these .05 plus shipping each.
  8. wootonc

    BLADES

    1000'S of blades .05 each plus shipping I dont know the size of these they were in a shop I bought and do not use them.
  9. I have put the 7/0 gami hook in mine and throw 10 to 12 inch worms on them alot also eagle claw makes a 7/0 wide gap that I sell alot of them in it also.
  10. what kind of hooks and weed guards do you have and skirt material
  11. wootonc

    spoon molds used

    got two used spoon molds price is tyd 1 is a CC-4-A AND 1 IS HS-3-34 thanks price is 28.00 for each mold shipped
  12. wootonc

    rattles

    anyone know of a supplier that had the plastic rattles that go on a spinner bait arm like stan sloan uses. thanks
  13. wootonc

    hook

    Could someone tell me what eagle claw hook black nickle matches the 32746 mustad. thanks
  14. wootonc

    teflon pins

    Where is the best place to buy teflon 1/8 pins in bulk. Thanks
  15. wootonc

    Striper jigs

    I was wanting to start tying some Striper Jigs and was wanting to know what is a good head style to use and what type of hair to use. wanting to do 1/2 to 1 ounce in size.
  16. What would be a good wire forming tool to make spinner bait and buzz bait arms and to make twist on the end of the wire. Thanks for the help.
  17. I am looking to make finesse jigs I have used the ones from fishing skirts.com but they do not have the colors I need skirts plus does but I have to buy 1000 of each color to get what I want and didnt need that many.
  18. Does anyone have a different place to buy the fine cut skirt material other than skirts plus or fishing skirts.com skirts plus you have to buy 1000 tabs of each color and skirts plus does not have the colors that I need to make. thanks
  19. I tried GLC and they pretty much told me that I need to go through Fishing Skirts.com or ZMAN
  20. Check with cadman on the powder paint I get most of mine from him and it all works great especially the green pumpkin he has it is the best I have used on his black it goes on very smooth for me.
  21. wootonc

    swivels

    Does anyone know where I can get these swivels with the sleeve that you can crimp on to hold the blade on the wire. Thanks for the help
  22. I have a tackle store that I own I sell my own jigs here and do a lot of custom stuff for customers and they plastic side is something theve been wanting me to get into for a while now just never pulled the trigger but I am making a move that direction and just reasearching before I put a lot of cash into it.
  23. Hello I am new to pouring of soft plastics. I have been making jigs buzz baits spinner baits shakey heads for about 6 years now. I am looking at getting into the injection of plastics mainly swim baits grubs and finesse worms. Looking for do's and don'ts before I wast a lot of money like I did when I started making jigs before I found this site. Best places to buy molds plastics and coloring's. Thanks for the help
  24. wootonc

    umbrella rigs

    I am looking for someone that injects or pours umbrella rigs I will add all the hardware just looking for the head and the wires put together. Thanks for the help.
×
×
  • Create New...
Top