Jump to content

Ichthus

TU Member
  • Posts

    274
  • Joined

  • Last visited

  • Days Won

    6

Everything posted by Ichthus

  1. Good morning all, does anyone have a source for flutter spoon blanks? I want some in the 5.5” and 6” range as well as some in the 7 and 8” range that have a reasonable price. I looked at kokanee dodger blanks but I’m worried about them holding up and being heavy enough to cast. Also any recommendations on clear coats for spoons that would allow me to paint them, add glitter and/ or heat stamp patterns and would hold up and not yellow too bad? TIA
  2. Yeah that was my last resort haha. With things like this though, it’s always the last resort that’s the best option I find. I’ll probably buy a few too just to experiment.
  3. Some of you may have seen this but there’s a new bait coming out of Japan and on the back, it has what looks like a Colorado blade but if you look on the other side where it should be cupped, it’s filled in. Upon watching videos of it, I realized it was a loud rattling blade, possibly plastic. It sounded like a rattle trap being ripped through the water except it was on the back of this frog. Really want to try and make one of these blades to coax the bass up through the weed mats. Any suggestions?
  4. I’ve had a friend already go after pike with the kbs just to test the coat. I’m from California so I don’t have to worry about pike. The kbs held up a lot better than we expected. I put on 3 coats of the spray stuff because I was in a hurry and it held up nicely.
  5. I sent some baits that were triple coated with the spray stuff to my friend who was pike fishing in Canada. Past baits I’d sent to him came back with little or no paint. KBS ones seemed to have more paint in tact. PS Mark, if you’re going to the delta, I’m jealous. I’m on Oklahoma for school right now.....
  6. It doesn’t react with plastics in my experience. I left some test baits in my car console last summer with various skirts and worms next to it and nothing happened.
  7. I noticed that and am interested to see how it will affect the action.
  8. https://www.wlure.com/collections/blank-crankbait/products/fishing-lures-blank-crankbait-upc735?variant=37120096780 its this one. And it's exactly what I was looking for. It's the same weight and length as the flap slap. And has the same body so this will be extremely close to what I'm looking for. Hopefully it has similar action.
  9. WLure has some blanks that are very similar to the shallow runner flap slaps
  10. Yup that's what I was looking for!
  11. And for clarification I do believe zman should defend their patent but I don't think that just because some guy makes one for himself in his garage that works a little better than the original he should get in trouble. I know if I had a patent and people started mass producing my idea without giving me credit I would be pissed too.
  12. Megabass has a bait called a flap slap. I'm seeing painted knockoffs on eBay now and I'm wondering on where they're coming from. Anyone?
  13. I've been doing what Mark does for a while here with the Phenix vibrating jigs. Ole California delta trick (wink wink) but I really wanna start pouring the heads myself. Zman had the right idea with the chatterbait but in the past years the quality of components has gotten worse from them. That's why I wanna make my own.
  14. thank you so much small jaw. I think it's ridiculous how aggressive Zman is with all of their patenting.
  15. It seems to make a bit of difference on the shake frequency for some reason. Thank you.
  16. I'm looking for coffin shaped shaker blades like the original vibrating jig uses. I've found sources from China, but they're sold out of the medium sized blades that are commonly used on the 1/4 oz size. these baits are for personal use.
  17. I'm looking to repaint an OG deps but im not sure where to start because of that shell. Has anyone done this before that can help me?
  18. Make a harness in the mold for the easy stuff. Depending on what you want, you may need to do it after it has been cast.
  19. Just bought another. Thanks
  20. I can't figure out who makes it. It's balsa with this nice rounded circuit board lip.
  21. Does anyone know what bait this is? Posting pictures now.
  22. Man! Those are killer! Are they on sale anywhere?
  23. Also try searching up s-waver or swaver
×
×
  • Create New...
Top