In making an acrylic saltwater trolling lure like the Yozuri big game bonita does anyone know what wire and size is used inside. there should be a supplier out there with saltwater accessories. I need direction if you can help. Thanks
similar to the yozuri lures; like the Big Game bonita 6.75" long
also like the MagBay Marauder 8" long
also top water poppers
Anything for wahoo, mahi-mahi and tuna
Thanks
just airbrushed a jointed glide bait and did the drip method in KBS Diamond clear coat, well didnt think about the moving parts getting bound up with the clear coat. Is there a way to dip and keep the joints working? Thanks
looking at buying a MHX high-Mod Gen 11 that is a naked graphite rod blank. I would like to put a nice durable gloss finish on it. what do I need to get a nice durable gloss finish.
Thanks
I do not but a good pic of one is on ebay, type in wiggle jig it will show a bucktail jig for bone fish. Its flat. Thanks for responding. I know it"s out there somewhere. I want the unpainted
trying to find a source for wiggle jigs in the 3/16 oz. to 1/4oz. unpainted. Any suggestions. Also looking for tinsel, rubber leg material also buck tails. Thanks
It was the Pro Tec white powder that seems heavy. If I shake it a little while air is on it seems to get fluid but that goes away when setting still. I might want to try changing the paper in the bottom. What paper do you use? I have tried different brown bags but i'm not real satisfied with the results.
The paint is about 7 months old and in the same containers as it came with about3/4s left.
I am having trouble getting the powder paint to form a good fluid bed in my cups. Does humidity effect the powder so it can't make a good airy fliud cup? It seems heavy. If so is there any way to get rid of the moisture if thats the problem? I only use them maybe once month and have about 3/4s of the cans left. Hate to throw them out. Any Ideas?
Can you use straight wire in the spinnerbait molds then after you pour put in the R bend using the little blue bender. This way the wire doesn't lay back over the mold when you close it. It looks to me then you can pour all your sizes at once. What am I not seeing. Thanks