BigDean

Guys I just watched a video and why the heck I never thought of this after all of these years of squirting a 3 second amount in a pill cup and I have never had a big issue with it curing and etc or tacky with devcon 5 min epoxy. This guy was using a scale you know the grain scale like the ones you use for reloading or your broadheads, you can get them off ebay for hardly nothing. So you tare your pill cup and let's say you pour 10 grains then you tare the scale back to zero then put the 2nd part at 10 grains or etc. It would amount to the most perfect 1~1 ratio you could get. I have a scale already, I just ordered some of the e - tex lite I have never tried it I have always used devcon. Guys also use hair dryer to warm up any epoxy against the bottle and when your done coating I always hair dryer the whole lure then put it in turner, if you might have added to much the heat will level it out. Plus I only put enough epoxy to coat the lure without having a dry spot also have a bendable light were you can put it close to lure with a pair of hemostasis clamped to bill it's easier to coat the lure that way and I turn it in the light to check for dry spots. I even use the hemostasis with zip ties in bbq turner and clip to bill instead of alligator clips or using wire to hook eyes or etc. Hope this helps I seen the scale thing and had to share...

Hey bud I can make you some stencils for a crank if you need some. I'll do you a set for 35$ I have a bunch of blanks what lure are you wanting to do?