19D10

Does anyone have any experience for color matching the orgional pre-rapela wiggle warts? Im needing some help with the belly of the the brown crawdad and the colors on the purple tiger..any help would be appreciated. Im using mostly createx paints..thanks

Ok whats bs? Can anyone post a link. I was thinking about switching to etex. I did not know there was a fume issue??

All the baits that this has happened to. Were usually painted within the last hour or so. I dont leave baits to sit out and clearcoat later. Even with them sitting for a hour or so i usually blow them off with a hair dryer just to make sure there is no dust or hair on them..anyway i have to order my devcon from amazon. No one around here carries it. So you never know how old it is! Been thinking about switching to envirotex. I hate not being able to clearcoat more than a couple baits in a batch.

Ok..ive probably coated over 200 baits in devcon. Never had a issue til i opened a set of new bottles. I cut the ends off of medical syringes. Mark the handles blue or red. Squirt 1 cc of each bottle into each syringe. Then gently push each into a medicine cup. I slow stir them for about 1 min..use long even strokes.i check the bait under a bright light to make sure there are no bubbles or missed spots. Then i put them on rotisserie. all is good right? Well until i check them them a couple hours later..they look like the have hail damage! Pits in the epoxy! Some of them even have a light white haze in them! Can some one give me some input?

Ok..ive probably coated over 200 baits in devcon. Never had a issue til i opened a set of new bottles. I cut the ends off of medical syringes. Mark the handles blue or red. Squirt 1 cc of each bottle into each syringe. Then gently push each into a medicine cup. I slow stir them for about 1 min..use long even strokes.i check the bait under a bright light to make sure there are no bubbles or missed spots. Then i put them on rotisserie. all is good right? Well until i check them them a couple hours later..they look like the have hail damage! Pits in the epoxy! Some of them even have a light white haze in them! Can some one give me some input?

Does anyone know of a decent supplier of blanks for crappie crankbaits..something like the strike king slab hamner. For some reason all of a sudden I have crappie fisherman beating me up for custom cranks

Well that would be the right thing to do wouldn't it? Well I have and this post is in no way a Crack a the supplier..I've had nothing but top notch baits and service from predator. I was just just mentioning the supplier to see if anyone had found a solution to that preticular issue!

Ok im.missing something...I've tried acetone and it clouds the bills up more for me..I bought a bunch of foiled baits that had the masking already on them from predator bass baits. when you take the masking off part of the bill has a haze to it..I've tried alot of cleaners even acetone..nothing clears it up..just fogs it up more..only way to make them clear is by coating with devcon but that looks like crap to me..they are still sitting unpainted

Also it's not gonna be a base or a main color..gonna be detail. So layering is not a option

Anyone have a createx recipe for green pumpkin. I have a guy wanting me to use that color and have no clue where to start. I can't even find a good picture of the color to work with..any help would be awesome!

Not gonna fit to many 2.5's on that baby..

They are airbrush paints

Has anyone tried the vallejo paint..the have several sets of desert camo and ww2 camo paint sets that has the Browns and greens needed for crawfish painting

If I can find a color wheel..seems like createx only sells there'should in paint kits..I've not found one sold separately yet

All the ones I've seen on makenzie require a respirator..I'm not set up for that..I'm painting in my basement where my ch&a is located..cant flood my house fumes..