Jump to content

MT204

TU Member
  • Posts

    46
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by MT204

  1. MT204

    Skirt tabs

    Not fishing related but sorta the same. One of my air hose suppliers just sent me a letter, sorry no resins available so we are not able to mfg air hoses for an unknown time. The hose's are made in the US but who knows where the resins come from. And yes a 25-50% increase.
  2. Would have to agree with Canga~ to some extent. Had the problem of oiliness with the essentials series, but not with the crystal clear blend.
  3. MT204

    Skirt tabs

    Funny you should bring this up. Last night checked and have colors in my whish list (fishing skirts) from April 6 2021. How can it be (ya I know) in this day and age that skirts are only made in 1 or 2 places in the world? Is the manufacturing so toxic that it can't be done in the US? Is there only one machine in the world? Is labor sooo much cheaper? Seems as though there could be somewhere in the US they could be made. That being said I wish there was someone who put together a "cross" reference for the part numbers from companies for the different "brands", just to get close sometimes. It's so dang hard to try and pick a color from a picture on the internet only to order it and go aw shit that isn't even close to what I was looking for. Just saying.
  4. So I got to admit I tried the DOP. The fanboys over on the DOP FaceBook page do nothing but rave about it. Well I bought the Finesse blend for some small ice baits and was very unhappy with it. No matter how long I waited or cooled the molds the legs on most small creatures came out deformed and they stayed "sticky" and would not cure. Coarse the answer they had was, you must not have stirred, shaken or blended it enough. I had. Well then you must not have heated it enough, I had. Well then you must have heated it to much, I had not. Well you should buy a vac chamber, I have one. Then I got to looking at the bottles after it had sat for some time and it was obvious that they had not mixed the drum enough before they put it in the bottles. I mixed the 3 bottles together and sorta got it to work. Time to go back to MF.
  5. Clean the mold with lacquer thinner. Paint with high temp paint. Let it dry over night and take a new razor blade and cut the paint of the flats. Eazy peazy! And yes silicon is extremely hard on paint and almost impossible to paint after silicon was on it.
  6. Been experimenting making large tubes myself for Pike. I like the idea of the tail pipe. Could weld a "heat sink" on the pipe then set it on a hot plate? Guess that's something to try this weekend.
  7. Someone over on the Facebook page had them custom made. Only had them made in 2/O and only sold like a 1000 at a time.I have made some using a modified Do-It mold and the sinker inserts just make sure they are the steel ones and not the brass ones.....so far no failures.
  8. Here's a lure retriever that I have always be intrigued with, just wish they were a bit less expensive. https://www.facebook.com/zahar.eu/ https://www.ebay.com/itm/SURFER-FISHING-LURE-RETRIEVER-HARD-BAIT-AND-SOFT-LURE-SAVER/123774631478?hash=item1cd18afe36:g:n0YAAOSwYvFZJpPE
  9. I personally would not use an infrared thermometer. Get yourself a good immersion quick read type. When I first started baits I used a very expensive infrared thermometer and found out right away that it only measures surface temperature not the inner temp. It also depends what the emissivity of the plastic is. Black would measure one temp while whites another when in fact they were the same temperature.
  10. Set a notification alert on your credit card for what ever amount you want. Every time there is a charge meeting or exceeding the amount there is a text, e-mail or both sent to you. You then know the instant a charge is made on your account. In most cases I get the alert before I even remove my card from the machine, solves a lot of problems.
  11. Some of my jigs I use eyes not so much because they are eyes but I sometimes feel maybe that speck of glow in the dark is helping? Confidence baits?
  12. Just got a pint from KBS a couple days ago and it's crystal clear in jar.
  13. With harbor freight sometimes it's hard to say what it does. HF is calling it a "flow regulator?", which explains why when you let off it goes back up to tank pressure. What your looking for is a "pressure" regulator. With a pressure regulator you can set the pressure and it maintains the set pressure whether the gun is spraying or not.
  14. I've been using it on everything and been very happy.
  15. Just happen to have a Diner Shiner in my pocket with no hook. Had a friend wondering the same thing so cast one without hook. Depending on how many you need just drill a hole threw the center. Could even make a drilling jig if needed.
  16. When they are out of a color it doesn't show up on their web site.
  17. I tried the epoxy route once and wasn't for me. Used Sally Hansen this summer on some chatter and spinner baits and had real good luck. Used the KBS Diamond coat the other night for the first time. As per lots of reading I transferred mine into glass canning jars with seals and am using the argon from Diamond coat. Yes it does have a powerful smell! That being said it must be good if it smells really bad? Nice thing is that I could have it shipped to Montana (winter here) and not have any freezing problems.
  18. Funny this came up. I have just started air brushing (trying) and my first batch of Createx Wicked colors just showed up, rock hard. I put it in a warm place and sent of an e-mail to Createx, here is their reply. Thank you for contacting Createx Colors. Please find attached our application guide. Wicked Colors will survive a freeze / thaw cycle. Our paints that do not survive a freeze/ thaw are AutoBorne Sealer, candy2o, 4030 Balancing Clear and 4040 Bleed Checker. For a complimentary catalog, please email us your shipping address and let us know if we may be of any further service. Best Regards, Createx Colors Customer Service info@createxcolors.com
  19. Yep. Got some 1/4" diam by 1/8" thick , from https://www.kjmagnetics.com/proddetail.asp?prod=D42. Carefully line up where you want them and drill a hole slightly larger than 1/4" (so the epoxy will ooze out). Glue them in and away you go.
  20. I've drilled and epoxied small magnets in a number of my molds, they really work great.
  21. It kinda looks like this post is going a bit sideways. That being said I'm human. I make mistakes, some times I can even laugh at them. Bottom line, I have ordered a lot from almost every company that's been mentioned and each has made a mistake at one time or another, it happens. They have always made it right. I believe that one's attitude also effects the out come. If I didn't order from one of them just because they made a mistake I wouldn't have anywhere to get any supplies from, which I guess the wife would like.
  22. To bad there's not more people that would take the time to share and work with kids as you did. In our area they have a hooked on fishing program. In the past there are times when 1/2 the parents have never been fishing much more made their own baits.
  23. I really like the idea of the beads, gives ya a bit more wire to work with. Gonna have to steal that idea for next years.
  24. I am going down the same road and have read till my head hurts. I just today ordered a Badger 105 Patriot. Can't say it's the best as I haven't gotten it yet but has come very highly recommended. Next comes the paint, another can of worms. I also just order a bunch of Createx Wicked colors. Now lots of experimenting and You-tube video.
×
×
  • Create New...
Top