Marker54

Custom made injector , dual pot (approx 48 oz each side ) side by side with independent temp controllers and variable speed stirrers for each pot. Both sides capable of simultaneous use and different temperatures, pressure , injection etc. Max temp for each pot is 190c .. valves are capable of up to 30psi of pressure, we shoot at 25psi (tiny little legs on one lure design ). Runs on standard 120 wall plug but it does need a 20amp outlet if you are going to run both sides at same time. It is capable of dual color injection and does have a mixing block .. though we don’t use it that we way. Will also come with the compressor and control boxes obviously. Please note this is a well used , but very reliable machine. It’s only a year old as a production machine but the demand volume has outgrown it .. we are moving onto a heat exchanger. $5k , I can take credit card (but need to add 3%) , PayPal works or a old fashioned check. I’ll crate it up for shipping but buyer is responsible for shipping (I’m guessing it weights 50lbs or slightly more ) machine is located at our shop here in Austin , Tx Email works best -marker54lures@gmail .. in subject line please put “injection machine”as that’s our default email box for website and it’s gets a lot emails

Delete post

I have two Custom Molds based upon Custom Designs,For sale. Both were development prototype molds for product that has since evolved. I am a full time Lure manufacturer (marker54.com) and these molds were included in lure development at some stage but have since laid on a shelf for a year or two - the shop is moving and i figure id sell them. I have the ability to take PayPal OR Credit Card (add 3%). I will ship the day of the transaction via US POSTAL 2 day Priority with tracking number. We are a 5 year old company with significant retail presence in the South East US and Based in Austin. So I'm legit ;-) ~ Joshua (owner Marker 54) Text or Call me with any Questions: 503-NINE-56-ZERO 362 A) 3 chamber Hook Lead + Rattle mold ($600).. Custom by Bob - 3/16 ounce lead mild for mid hook shaft Lead placement that is integrated to also hold a 5mm Glass Rattle (see picture). Mold Can accept BOTH 90 degree and Straight Shank cross eye hook styles to any shaft length and up to about 4/0-ishy wire thickness. Mold also Comes with about 9000 5mm Glass Rattles. PLEASE NOTE : this was a 4 chamber mold, But it fell from the bench and one chamber got Scarred _ i have Jb welded that chamber full but 3 perfect chambers remain in the mold. The mold was intended to help integrate a glass rattle into the M54 Shrimp lure product line - however the glass rattles did not survive more than one fish making them not retail product worthy. This mold could be used for a custom Jig that wants to integrate a Rattle OR for a custom cross eye style worm hook that wants a belly weight + rattle combo. AGAIN this is a custom mold based upon a unique design. B) Simple Swim tail lure Custom Design (500). This is a 6 cavity (individual injection) 4"-ish swim tail based upon a Unique design Hook+Wedge tail hybrid custom design. The tail section is thin and does not cause the body of the lure to Wobble- SO the lure action is more like a grub tail where only the tail swims and the body does not wobble, however is a paddle tail style design that allows the paddle tail to "swim" even when the lure is falling thru the water. This is a custom mold that was the first prototype mold in a soon to be released product line. The final product has deviated dramatically from this original design - so i feel comfortable selling this mold. The lures are very cool, pretty unique in their swimming action - however unlikely suitable for mass retail product line production. (but they catch a lot of reds thats for sure).