Jump to content

OIR

TU Member
  • Posts

    136
  • Joined

  • Last visited

  • Days Won

    8

Everything posted by OIR

  1. im starting to make one myself out of a chopping board on spikes where I have drawn threads in the feet of the air pump so its stuck to the board and transmits vibration to the cup ( later I will try springs as feet) the air comes from the bottom center not from the side and i have laid a rounded cotton layer (It is just plain cotton not the pads you can get) under a filter the filter is pressed out of a vacuum cleaner bag (so it is 2 layers) the powder paint it expands good in the cup and got no valcano and the powder paint: cheap hand blender and bowl run the powder paint for 30 min. . the final one gets a JBL ProSilent air pump , I like the air pump regulator it got.
  2. 1. make first part of the mold and let it set for 3 hour , put it in the freezer (cold play-doh is more easy to remove) 2.after cleanup brush on: Liquid Release Agent Wax (Day 1) 3. day 2 add more Liquid Release Agent Wax 4. day 3 add Liquid Release Agent Wax let it set and make part 2 of the mold (:to remove play-doh put it in the freezer and let it get cold remove as much as you can and clean the first part of the mold using a nailbrush and water ) . RTV High Temperature Silicone Mould Making Rubber and Liquid Release Agent Wax (dwrplastics ebay)
  3. Gelflex (145 grader C remelt/microwave ) took a master (the clear epoxy) and put it in silicone - cut it into 2 parts - and laid it down in a thin layer of silicone melt the Gelflex in microwave (300 out of 700 on the microwave setting) and poured it over mix epoxy and 50% talc and got a mold - man made a test shot note: Flexget you can remelt over and over silicone you can grind up and use as filling but I make several mistakes: 1.no time to make a good 2 part mold ( I just cut it into a 2 part) 2.forgot to heat up the silicone before I poured flexgel over it (hot vs cold) 3. vacuum the flexget to get a more clean details of the mold (just the inside) (flexgel melt together) 4.might go for the blue flexgel (its harder) ----------------------------------------------------------------------------------- right now I dont got time to work on gelflex and how to copy soft bait to a Injecting Soft Plastic Baits mold. ...but it works so in time I will work on it.
  4. http://www.tackleunderground.com/community/topic/20117-printed-laminated-bags
  5. OIR

    Hard Tail

    1" paper punch 6mm Metal Hole Punch Plier (look up the Reviews...some are bad made) O Rings Boilies Baits clear PETg plastic sheet 0.5mm Pellet Bait Bander Tool Cyanoacrylate 502 Super Glue (I only glue the O-ring)
  6. price is ok for the molds. webpage need a english translation You can't just send the customer to a Russian post page. high speed centrifugal stone mold.....hell no put some steel shield up one small crack in the stone...and bang.
  7. https://www.ebay.co.uk/str/dwrplastics RTV High Temperature Silicone Mould Making Rubber its fast cure (max 2 min mix and cure in 30 min)
  8. some soft bait just dissolves the silicone..had a few
  9. Yellow orange white (new flash I need to learn how to use it) pour the plasticisol on powder not the opposite
  10. OIR

    Boom Shad

    jpg 34- 45 -47 https://vk.com/market-141948455
  11. OIR

    web site editing

    https://uk.pcmag.com/web-site-hosting-services/42131/guide/the-best-website-builders-of-2018 https://www.youtube.com/results?sp=CAJCBAgBEgA%253D&search_query=connect+live+with+my+website
  12. a mix of firm from https://lure-solutions.co.uk/ and http://lurefactors.co.uk/ soft lure-solutions got a acid smell like but it goes away after a few days lure factors got the plastic smel..but stays a long time (15-30 days) made a mix ...(the firm was realy firm) af the two and got the best 50/50 mix: nice smell and it goes away after 3-4 days firm ..but not to firm clear and doesn't yellow after many reheat.
  13. http://baitmold.com/custom-bait-molds/ well ask first what type of file they are using . you can get many converter free on the web but as a plasma cutter I get a lot of files that I have to correct and it costs work time that the customer has to pay
  14. Aluminium oxide powder are 50% of the mix (50g Aop /100g eopxy) pure epoxy can now be made since the mold is now thicker than the original.
  15. Im starting to make some Cheburashka Lead Sinker molds and got the ide: freeze the soft clay down before i take it off..and yes it comes clean off. (the red ball mold was a mess so I stuck the clay back on and after a freeze comes clean off too.)
  16. Vapor Smoothing https://www.youtube.com/watch?v=Kh60wlF-Opk https://www.youtube.com/results?search_query=pla+acetone my setup on PLA is just a airtight plastic box and in it I got a small chopping board on 4 legs and below is a rag I put some acetone on and I use Sketchup Pro (youtube got a lot of how to) https://www.sketchup.com/products/sketchup-free
  17. Permanent Masters for Mold Making of XXX https://www.polytek.com/tutorial/creating-permanent-masters-mold-making ---------------------------------------- master mold frame https://www.injectionmolder.net/moldmaking.html -------------------------------------------- mold box https://www.moldmakingtechnology.com/articles/plastic-prototypes-using-silicone-rubber-molds -----------------------------------------------
  18. OIR

    Colour: Jungle Green

    from pearlspigments (ebay)
  19. OIR

    long tail

    the 2 master and the soft plastic tail cut open
  20. OIR

    Mold making

    made 6 molds. 4 molds made out of 100G epoxy + 50g Aluminium oxide powder 2 mold made of just 130g epoxy the 2 molds of pure epoxy was just...bad but.. the 4 Aluminium oxide works great. I see if I get the time to test em more...and if it works I post how to in Homebrew Tools. (and yes it pull heat from the pour quick)
  21. OIR

    Mold making

    well the white mold is from ebay ...the blue is leftover silicone the clear is epoxy https://www.ebay.com/itm/Soft-Plastic-Lure-Mold-Bait-DIY-Do-It-Moxi-Authent-X-Grub-Twister-Worm-Fishing/192315222466?ssPageName=STRK%3AMEBIDX%3AIT&var=492260024013&_trksid=p2060353.m2749.l2649 https://www.ebay.com/itm/The-Ultimate-Crystal-Clear-Cast-Resin-2-Kg-Epoxy-Resin-1-Harder-Transparent/222885311224?hash=item33e4fff2f8:g:SxgAAOSwxo9aqoRE but im on it.. Aluminium oxide powder + epoxy the first clear one is now stone hard..so in 4-5 days time I can test run the white one..its more simpel. but I think I can copy the ribber one if I use vaseline and not som liquid wax
×
×
  • Create New...
Top