Jump to content

Ryan V

TU Member
  • Posts

    73
  • Joined

  • Last visited

  • Days Won

    3

Everything posted by Ryan V

  1. I can put it in next year if I don't come up with something I like better by then
  2. This bait was made for the lure contest but I thought it was open through the end of April rather then closing on the 29th. so I hope you enjoy this bait here instead. It is a sunfish glide bait bade from colored pencils.
  3. I thought the contest was open through the end of April and just finished my entire and was going to post it tonight. That's my own dumb fault. Disappointed I wont be in this one but will post my bait in the gallery
  4. I'm a very big fan of scroll saws for lure making. I have the option to use a band saw but always chose the scroll saw for how smooth of a finish it leaves and how accurate I can be. You can even cut through 1 1/2" lumber at a decent pace with the right set up. If I could only pick one blade size it would likely be #5. There's a huge difference between a scroll saw that takes a pin end blade and a saw that can take a pinless blade. Pinless blades are thinner, allow tighter turns and are often a nicer quality. I'm guessing many people who don't like scroll saws or talk about how slow they are using pin end blades. Some saws can take either pin end or pinless. I had a WEN saw that could do either. I currently have a RBI 226 that I found used that I highly recommend.
  5. Ryan V

    20220405_183900

    It's a glide bait
  6. Ryan V

    20220405_183126

    I learned from SolarBaits
  7. Ryan V

    20220405_183900

    Wanted to do something showing natural wood.
  8. Ryan V

    saugeye bait.jpg

    Very cool thanks! I'm going to have to try that sometime.
  9. Ryan V

    saugeye bait.jpg

    Looks great as always! Where do you get the stencils for the texture on the gills of many of your baits?
  10. I've been wanting to try color shift paints for awhile. Anyone use them or recommend what kind to get? Any tips and tricks with them would be great too. I know the color you spray them over makes a big difference in how they show up or how well they shift colors.
  11. Ryan V

    8 inch bait2.jpg

    Really good looking paint scheme! Especially for how few different colors there are
  12. I use a scroll saw for all my baits and lip slots. I hold the lip against the bait at the angle I want and trace on both sides of the lip with a fine pencil and then cut to the inside of both lines. I always need to take at lest two passes but you should be able to get any thickens you need by taking really light passes and testing the fit until you get it perfect.
  13. Thank you for running it Curt! I really enjoy the contest.
  14. Ryan V

    carved foil bait.jpg

    Where do you get gold foil like this? Looks great!
  15. I'm supersized at how few entries there are this year. I thought there would be more this year not less with how much time people have had with the lock downs.
  16. Ryan V

    Crappie Swimbait

    It's done with a scroll saw by stacking two different kinds of wood on top of each other and drilling a very small hole that you can put the saw blade though. You have to tilt the table of the saw at around 3 degrees so that after cutting out whatever shape you want the bottom piece fits into the top board with zero gaps. I filled the hole drilled in each piece with glue and ebony dust.
  17. This is a 6" crappie swimbait made entirely of natural wood. There is zero painting on this bait. Every detail was inlaid with a scroll saw. It is made from five different kinds of wood: maple for the belly, pine for the yellow of the upper back, green poplar for the back, walnut for the head and tail, and ebony for the black spots. I had to do everything twice to make two sides, and I joined the two sides with a center core of maple and poplar.
×
×
  • Create New...
Top