Search the Community
Showing results for tags 'powder coat'.
Found 3 results
-
I've been making jigs for a while now and have had only one real problem while doing it. When i put my "weedless" jigs in my toaster oven at 275, the fiber weedguards bloom out. Any ideas?
- 19 replies
-
- 1
-
-
- weedguard
- powder coat
- (and 2 more)
-
I use an old kitchen knife I found for cutting bait. It's stainless, but the salt water keeps rusting it. I decided to powder coat it, and it turned out pretty good. While I was at it, I took a rusted spoon I had found in the water, cleaned it up and powder coated it white. I wanted a red stripe, but wasn't sure how to make a nice clean one. What I ended up doing was brushing some powder coat onto the glue side of a piece of scotch tape. After baking the white background to set it, I heated the spoon a little more over a heat gun, then laid the tape glue side down on the spoon. It melted right onto the spoon! Nice way to get a clean pattern onto a base coat.
- 12 replies
-
- 3
-
-
- paint
- powder coat
- (and 2 more)
-
Hey guys, I'm fairly new to this forum and i'm having an issue with my powder coating. I do it for myself and have managed in the past, however this time around the color isn't cooperating. I use the Pro-Tech powder paint by CSI. It is older - i think i've had it for 2-4 years. Will age affect this? The powder seems fine. When i heat the jig head and dip in the powder, some of them don't take the powder well - looking like moss on a rock or cracked. The ones that do look decent, when baked in my toaster oven all are jacked up. My main two colors (green pumpkin & watermelon) look like the color they should before baked, and after baking they look the same this year - no difference in color. It also appears that the black powder paint is nearly baking off. any suggestions would be great appreciated.
