Jump to content
CreekMonster

Painting Devcon

Recommended Posts

Just touch sand it with 220 sand paper. Lacquer will stick to Devcon without sanding. There is no real problem there. But what the sanding will do is show you any dips, holes, or missed spots in the Devcon before painting. This is REAL important if you want a true smooth finish. When you are done lightly sanding, then wipe the lure down with a damp paper towel to get the dust off and then shoot.

Skeeter

Link to comment
Share on other sites

You are not just ruffing the surface of the lure with the sand paper. You are leveling out the surface. If you use a good primer, the one shot will take care of any scratches. But the bottom line is this... you do not need to prep devcon before shooting it with lacquer.

Skeeter

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top