Ryan Posted January 1, 2008 Report Share Posted January 1, 2008 Can you pour wheel weight lead from a bottom pour furnace. If so, is there anything you need to do to make this work better? Thanks for the help Ryan. Quote Link to comment Share on other sites More sharing options...
LedHed Posted January 1, 2008 Report Share Posted January 1, 2008 You can pour with the wheel weights – crank up the heat. If you are pouring fishing weights the lead is fine but if you want to pour jigs you should add soft lead too it. I don’t like using or cleaning lead from wheel weights in my bottom pours. Don’t like using the lead for jigs either, there is too much junk in wheel weights (here it’s usually 92% to 97% lead). I use hot pots to clean lead and pour sinkers. It’s slow but you shouldn’t be in a hurry if you are pouring lead anyway. Be careful. Quote Link to comment Share on other sites More sharing options...