Jump to content
bigyen

Devcon Question

Recommended Posts

Devcon Two Ton thins easily with a few drops of denatured alcohol or acetone. I mix the epoxy for 2 bass baits at room temperature, then dip my brush into the alcohol and flick in a few drops, and mix it in with a plastic strip from a credit card. You can dilute D2T up to about 50% and it will still cure into a smooth coating. The thinner the epoxy, the more you need to rotate the bait to prevent it from migrating to the tail. I use a flat 1/4" artist's brush for application. Clean it vigorously with the alcohol afterwards and it will last indefinitely. With a solvent added to the epoxy, it will make any solvent based colors such as a Sharpie, run.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top