jth21usa Posted February 6, 2008 Report Share Posted February 6, 2008 Has anyone trieg to make a spinnerbait mold with this? What was your results? Is it worth the time or should I just go to a mold maker? Justin Quote Link to comment Share on other sites More sharing options...
psilvers Posted February 8, 2008 Report Share Posted February 8, 2008 Try Quick-Sil at www.miniaturemolds.com I have used their stuff and it is pretty good. Just make sure your lead is not too hot. Pete Quote Link to comment Share on other sites More sharing options...
jth21usa Posted February 8, 2008 Author Report Share Posted February 8, 2008 Thanks for your help, I didn't want to spend money without some follow up. Justin Quote Link to comment Share on other sites More sharing options...
psilvers Posted February 9, 2008 Report Share Posted February 9, 2008 I posted another follow up that got lost. I said that the RTV molds are fine for limited production. If you are thinking of doing something on a commercial basis, you might want to investigate a custom mold. I haven't had a custom aluminum mold made, so I don't know the cost. The RTV is good for limited production (i.e. me and a bunch of buddies). Pete Quote Link to comment Share on other sites More sharing options...