Jump to content
DanCampbell

Hello

Recommended Posts

Hi All,

This is my first post and I would like to start off by saying I really like this site. I have been looking for a hobby for a while and I want to try my hand at lure making. I am reading through posts in an attempt to choose the correct tools. I want to start with top water plugs and poppers.

I look forward to reading through the information you all have posted.

Take care

Dan

Link to comment
Share on other sites

Welcome to TU,

I think you have chosen a good hobby and found the right place to get all the information you would ever need.

A very important step in getting started is choosing the correct wood. There is a lot of information on here about lures and the things needed but not very much about the woods to start with. Make sure you choose a wood that is strong enough for the fish you will be fishing for, or one that can be made strong enough for the fish you make them for. If you use a wood that is too heavy you will not be able to achieve the desired action and castability you might want in a topwater bait. Make sure you get wood that is kiln dried or at least has a very low moisture content.

You talked about the tools needed, and that will all depend on the type of wood you will be making plugs out of.

Tell us a little about your location and the type of fish you like to fish for and there will be a lot of members that willing to offer advice whenever you need it.

Link to comment
Share on other sites

Welcome to TU dan.

This thread is a good start for tools required:

http://www.tackleunderground.com/forum/hard-baits/13262-tools-tools-more-tools.html

But to start with, apart from simple hand tools, you should invest in a Dremel drill. They are not the cheapest drill on the market, but I hope you learn from my experience, cheap drills are very expensive. You will burn out the first one half way through your second body. You will then step up a few dollars, but within a month you'll be shopping for a Dremel.

I bought a cordless, as I wanted to do waters edge adjustments to lips etc. I've had it a year and it is going strong. But just cutting one balsa body is enough to drain the battery. So a regular corded Dremel and a bunch of assorted bits is my advice for your first purchase.

Link to comment
Share on other sites

Thanks for

I live in northern VA and like to fish for bass in lakes around the Culpeper area, I just found a quiet little spot called Crockett park with a pretty lake.

I have a dremel tool, I also have a Grizzly mini lathe on order. What I do need to learn about is airbrushes and compressors. I don't mind spending money on good equipment but I want what others have used with good results.

I really thank you for the advice and information you gus post.

Thanks a lot.

Dan

Link to comment
Share on other sites

Here's some airbrush links to start you off. This list is just a sample of the information available here:

http://www.tackleunderground.com/forum/hard-baits/12085-quick-painting-question.html

http://www.tackleunderground.com/forum/hard-baits/10515-airbrush-prices.html

http://www.tackleunderground.com/forum/hard-baits/8852-airbrush.html

http://www.tackleunderground.com/forum/hard-baits/8446-air-brush-recommendations.html

The secret is to find the key words and then search on them. Multiple word searches will get the list down to something specific. I found the above by searching - iwata paasche compressor.

There is another ton of info on compressors, as it comes up quite often. Try - compressor quiet trap regulator - these words in various combinations should get you some useful bed time reading.

Link to comment
Share on other sites

Here is a good topic on lathe chisels.

http://www.tackleunderground.com/forum/hard-baits/13069-lathe-chisels.html

Let some of the other guys give some direction on types of wood to use with a lathe.

Here is the wood lathe tips tutorial that Redg8r.

http://www.tackleunderground.com/forum/hardbait-how/5188-kb-basic-wood-lathe-tips.html Click the PDF file attached.

Link to comment
Share on other sites

That sounds great,

I will read through the links and start thinking about an airbrush.

I was holding off on buying any painting equipment until I turn out a good lure shape, I have never used a lathe and will have to buy a book or take a class to get the in's and out's down pat. I plan to use eastern red cedar for my top water lures but I will rip some 2X4's to practice with.

White pine is pretty cheap.

Dan

Link to comment
Share on other sites

Just don't get the brilliant idea to use pressure treated wood for you lures. The fumes are deadly, and the fine dust from sanding is bad for you, too.

Sharp tools are the key to successful, and, more importantly, safe turning.

A dull cheisel will grab in the wood and flip back at you faster than the speed of light.

Lathe cheisels do not make good forehead ornaments.

Read the tutorials, and go slow. You'll get the hang of it in no time.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top