Jump to content
KAOS Tackle

Playing with the new mold

Recommended Posts

These were poured with clear plastic and a pinch of pearl hi-lite to give it some depth and shimmer I then took my airbrush and hit the back with black, added the eyes and then dipped in clear to seal. The dot was made with a sharpie (note: sharpie ink will run when dipped in hot plastic) I will use paintbrush and createx next time.

Share this post


Link to post
Share on other sites

I believe the vertical line is from the plate sandwiched between the mold halves to give the hollow body. Apparently the plastic isn't flowing around the plate completely. Maybe the mold wasn't hot yet and the plastic cooled.

Share this post


Link to post
Share on other sites

Yes, these are the "hollow body" style. Smallie is correct, The vertical line is from the insert that creates the "hollow body" or hook slot. The part you can see is the transition where it goes twice the size and comes off a 45 degree angle. It poured all the way but since this is almost see through it is very easy to see.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...
Top