Jump to content
3 replies to this topic
Posted 25 December 2003 - 04:47 PM
hi guys merry xmas, need a tip on whether i can use white spraypaint as a base coat over the final sealer sanding coat as i ran out of white primer!!!thanxs for any help in advance Rob
Posted 30 December 2003 - 12:44 PM
thanxs anyways skeeter, but after looking at all the people who veiwed and did not have an answer!!!!!!! i went out and got some primer, did not want to ruin the 6 jerkbaits i had done , but just for the sake of it was going to use envirotex lite as a top coat,again thanxs anyways. Rob
Posted 30 December 2003 - 11:54 PM
Your welcome Robert. I was a little lost as to where you were in painting the bait. If you are using Envirotex over the bare wood to seal it before you paint it..... Then you might be able to get away with just white spraypaint. My experience has been that anything that is water based has trouble sticking to a slick clearcoat type surface. I is like trying to paint glass. Even roughing the surface did not work well enough for me. But it looks like you got the primer...... so good painting.