Cadman could you please send me the info on building the fluid bed.
Jump to content
DIY fluid bed?
284 replies to this topic
Posted 10 June 2010 - 06:42 PM
Posted 18 June 2010 - 09:07 AM
Hi Guys yes i do have detailed plans, which tell how to make a Fluid Bed
and it includes a parts list of items needed, which can be purchased from:
Home Depot, Lowes or Menards
Fittings & Tubing
Send E-mail to:
Posted 18 June 2010 - 10:51 AM
I have plans that I've been sending this entire time to all who ask, so yes they are available. Are you looking for plans, or what are you requesting?
Posted 19 June 2010 - 04:00 PM
Looks like he's advertising his own set of plans
Posted 26 June 2010 - 06:47 PM
Here is a downloadable PDF on how to build a FLUID BED
Posted 09 July 2010 - 02:39 AM
Guys here is the PDF i did on making a fluid bed
Posted 01 September 2010 - 01:32 PM
Cadman you send it to firstname.lastname@example.org Thanks
Thanks JSC, I just sent a copy to delw a couple of days ago. I don't always check all the threads. However if you PM me, then I know I will get it out to you, in a couple of days, if not the same day. I am more than willing to e-mail anyone here info. Just remember on the PM to put your e-mail address down. I get a lot of PM's without e-mail addresses, and then I have to PM back, and guys don't PM me back right away, so PM tag occurs...........Take Care.......Cadman
Posted 01 September 2010 - 05:54 PM
I made a fluid bed the other day and just used it for the first time yesterday...........it worked great,far as getting a nice thin coat of paint on the jig. I had a question for all of you guys that have used them a bunch.........is the "dust cloud" that comes out of the top of the cup normal, or am I just using a little too much air ??? Any insight would be appreciated.
Edited by FUBAR, 01 September 2010 - 05:55 PM.
Posted 01 September 2010 - 07:42 PM
e-mail sent with fluid bed instructions.
Posted 01 September 2010 - 07:45 PM
Mark turn down the air until you get what looks like boiling water or in our case boiling powder. That should do it for you.
Posted 15 October 2010 - 02:51 PM
May I have a copy cadman?
Posted 15 October 2010 - 03:22 PM
Edited by cadman, 15 October 2010 - 03:27 PM.
Posted 26 October 2010 - 02:55 PM
cadman, would you send me the fluid bed plans as well?
Posted 26 October 2010 - 08:59 PM
Posted 02 November 2010 - 05:25 AM
Cadman, Could I please have a copy of the fluid bed plans too?
My email is email@example.com
Posted 02 November 2010 - 06:15 AM
Welcome to TU. E-mail sent.
Edited by cadman, 02 November 2010 - 06:16 AM.