244 replies to this topic

[cadman]

Bartos, on 10 June 2010 - 08:25 AM, said:

Cadman could you please send me the info on building the fluid bed.

bartol.vukic@gmail.com

Thanks

E-mail sent

[David_Cooksey]

Hi Guys yes i do have detailed plans, which tell how to make a Fluid Bed
and it includes a parts list of items needed, which can be purchased from:


Wal-mart......Pump

Home Depot, Lowes or Menards
Fittings & Tubing


Send E-mail to:

Brushcountryjamboree@gmail.com

Sincerely
Dave

[cadman]

David_Cooksey, on 18 June 2010 - 09:07 AM, said:

Hi Guys yes i do have detailed plans, which tell how to make a Fluid Bed
and it includes a parts list of items needed, which can be purchased from:


Wal-mart......Pump

Home Depot, Lowes or Menards
Fittings & Tubing


Send E-mail to:

Brushcountryjamboree@gmail.com

Sincerely
Dave

I have plans that I've been sending this entire time to all who ask, so yes they are available. Are you looking for plans, or what are you requesting?

[BBK]

cadman, on 18 June 2010 - 10:51 AM, said:

I have plans that I've been sending this entire time to all who ask, so yes they are available. Are you looking for plans, or what are you requesting?

Looks like he's advertising his own set of plans

[David_Cooksey]

Here is a downloadable PDF on how to build a FLUID BED


Dave

Attached Files

•  How to Make a Fluid Bed for Powder Painting Fishing Lures.pdf   68.32K   142 downloads

[David_Cooksey]

Guys here is the PDF i did on making a fluid bed

Dave

Attached Files

•  How to Make a Fluid Bed for Powder Painting Fishing Lures.pdf   68.32K   51 downloads

[tnsuperpro]

NEW to the site. Cadman, can you send me the information on how to make a fluid bed? thanks
email- tjohnny62@charter.net

[cadman]

tnsuperpro, on 12 July 2010 - 02:01 AM, said:

NEW to the site. Cadman, can you send me the information on how to make a fluid bed? thanks
email- tjohnny62@charter.net

E-mail sent. If you have any questions let me know.

[rick1984]

Cadman you send it to normington1984@sbcglobal.net Thanks

Thanks JSC, I just sent a copy to delw a couple of days ago. I don't always check all the threads. However if you PM me, then I know I will get it out to you, in a couple of days, if not the same day. I am more than willing to e-mail anyone here info. Just remember on the PM to put your e-mail address down. I get a lot of PM's without e-mail addresses, and then I have to PM back, and guys don't PM me back right away, so PM tag occurs...........Take Care.......Cadman
[/quote]

[FUBAR]

Hey Guys,
I made a fluid bed the other day and just used it for the first time yesterday...........it worked great,far as getting a nice thin coat of paint on the jig. I had a question for all of you guys that have used them a bunch.........is the "dust cloud" that comes out of the top of the cup normal, or am I just using a little too much air ??? Any insight would be appreciated.

Thanks,
Mark

Edited by FUBAR, 01 September 2010 - 05:55 PM.

[cadman]

rick1984, on 01 September 2010 - 01:32 PM, said:

Cadman you send it to normington1984@sbcglobal.net Thanks

Thanks JSC, I just sent a copy to delw a couple of days ago. I don't always check all the threads. However if you PM me, then I know I will get it out to you, in a couple of days, if not the same day. I am more than willing to e-mail anyone here info. Just remember on the PM to put your e-mail address down. I get a lot of PM's without e-mail addresses, and then I have to PM back, and guys don't PM me back right away, so PM tag occurs...........Take Care.......Cadman

e-mail sent with fluid bed instructions.

[cadman]

FUBAR, on 01 September 2010 - 05:54 PM, said:

Hey Guys,
I made a fluid bed the other day and just used it for the first time yesterday...........it worked great,far as getting a nice thin coat of paint on the jig. I had a question for all of you guys that have used them a bunch.........is the "dust cloud" that comes out of the top of the cup normal, or am I just using a little too much air ??? Any insight would be appreciated.

Thanks,
Mark

Mark turn down the air until you get what looks like boiling water or in our case boiling powder. That should do it for you.

[Booten]

cadman, on 01 September 2010 - 07:45 PM, said:

Mark turn down the air until you get what looks like boiling water or in our case boiling powder. That should do it for you.

May I have a copy cadman?

ooten.brian@gmail.com

[cadman]

Booten, on 15 October 2010 - 02:51 PM, said:

May I have a copy cadman?

ooten.brian@gmail.com

Brian,
E-mail sent.

Edited by cadman, 15 October 2010 - 03:27 PM.

[Bassman4life]

Cadman
May I have a copy fluid bed plans?
My email is makp@charter.net
Thanks

[cadman]

Bassman4life, on 15 October 2010 - 04:09 PM, said:

Cadman
May I have a copy fluid bed plans?
My email is makp@charter.net
Thanks

Makp e-mail sent

[m82a1]

cadman, would you send me the fluid bed plans as well?

m82a1.50@gmail.com

Thanks

[cadman]

m82a1, on 26 October 2010 - 02:55 PM, said:

cadman, would you send me the fluid bed plans as well?

m82a1.50@gmail.com

Thanks

m82,
Email sent.................Cadman

[Pilly]

cadman, on 26 October 2010 - 08:59 PM, said:

m82,
Email sent.................Cadman

Cadman, Could I please have a copy of the fluid bed plans too?
My email is pilly58@bigpond.net.au

Thanks Mate

Regards
Adrian

[cadman]

Pilly, on 02 November 2010 - 05:25 AM, said:

Cadman, Could I please have a copy of the fluid bed plans too?
My email is pilly58@bigpond.net.au

Thanks Mate

Regards
Adrian

Adrian,
Welcome to TU. E-mail sent.

Edited by cadman, 02 November 2010 - 06:16 AM.