So far the only thing I found was this
Fluid Bed - Ohio Game Fishing Community
there was a much better one somewere but I havent been able to find it.
Navigation |
 47
244 replies to this topic
#42
Advanced Member
Posted 01 February 2009 - 06:54 PM
Guys just PM Cadman .. he has a PDF he can send you ... matter of fact PM me and I will send you a copy but I know Cadman would like to know how many he has snet out.
JSC 
#43
Member Posted 02 February 2009 - 09:52 AM
Hey guys, I have told a few people I would send some pictures of the fluid bed but haven't gotten around to it yet. I do appoligize! I am in the middle of a very large project that I have to get finished, but I will do a short video on how to build the one I have. I will put it up on youtube this week. The one I have built will cost about 50.00 to 75.00 depending on the supplies you have on hand.
#44
New Member Posted 03 February 2009 - 12:51 AM
Hey JSC, thanks for sending me the info to make a fluid bed, and thanks to cadman for making the instructions accessible to us. Thanks a lot, I am going to make one soon.
#45
Advanced Member
Posted 03 February 2009 - 10:36 AM
Hope it fixed you up.
I think Cadman must be busy or he would have picked up on this thread .... Just give him a Big Thank You  .. He really did a good job on it ... Thanks TedJSC
#46
Advanced Member
Posted 03 February 2009 - 12:41 PM JSC said: Hope it fixed you up. I think Cadman must be busy or he would have picked up on this thread .... Just give him a Big Thank You .. He really did a good job on it ... Thanks TedJSC Thanks JSC, I just sent a copy to delw a couple of days ago. I don't always check all the threads. However if you PM me, then I know I will get it out to you, in a couple of days, if not the same day. I am more than willing to e-mail anyone here info. Just remember on the PM to put your e-mail address down. I get a lot of PM's without e-mail addresses, and then I have to PM back, and guys don't PM me back right away, so PM tag occurs...........Take Care.......Cadman #47
New Member Posted 04 February 2009 - 12:20 AM
I made two fluid beds tonight. A 3" and a 2". Very easy to do. The instructions from cadman were easy to follow. Thanks a lot.
#48
New Member Posted 10 March 2009 - 03:40 PM
Could someone send me the instructions for the fluidbed? z583@hotmail.com
#49
Advanced Member
Posted 10 March 2009 - 04:22 PM firefighterian said: Could someone send me the instructions for the fluidbed? z583@hotmail.com E-mail sent #50
New Member Posted 12 June 2009 - 05:51 PM
Would someone send me the instructions on how to build a fluid bed?
Thanks so much. Timbotide #51
Advanced Member
Posted 12 June 2009 - 07:32 PM timbotide said: Would someone send me the instructions on how to build a fluid bed? Thanks so much. Timbotide Timbotide, PM me your e-mail address, and I'll get it out to you. #52
TU Supporter Posted 10 July 2009 - 06:24 PM
thanks Cadman sent you email hope you got it
 
#53
Advanced Member
Posted 10 July 2009 - 08:12 PM Bigfish316 said: thanks Cadman sent you email hope you got it Your welcome and yes I got the email, I am always willing to help if I can. #54
New Member Posted 16 July 2009 - 09:44 AM
Cadman, i would like to get a copy of the fluid bed instructions also, i saw some other instruction but wasn't sure if you put the paint right over the paper membrane or not, ty any info. would be much appreciated
#55
Advanced Member
Posted 16 July 2009 - 09:47 AM bassman65 said: Cadman, i would like to get a copy of the fluid bed instructions also, i saw some other instruction but wasn't sure if you put the paint right over the paper membrane or not, ty any info. would be much appreciated PM me your e-mail and I'll get it out to you. #56
New Member Posted 20 July 2009 - 07:49 PM JSC said: Guys just PM Cadman .. he has a PDF he can send you ... matter of fact PM me and I will send you a copy but I know Cadman would like to know how many he has snet out. JSC #57
New Member Posted 20 July 2009 - 07:56 PM cadman said: PM me your e-mail and I'll get it out to you. #58
Advanced Member
Posted 20 July 2009 - 08:11 PM interama said: I am a new member and would love a copy of the fluid bed instructions. My email is pignjig@triad.rr.com E-mail sent #59
New Member Posted 29 July 2009 - 08:08 PM cadman said: E-mail sent #60
New Member Posted 20 August 2009 - 02:33 PM
This fluid bed idea sounds good. If you do not mind I also would like information on how to build one!
chevy343@att.net Thanks,Len |
