Jump to content

- - - - -

US Composites Kleer Kote & Moisture Cure

  • Please log in to reply
2 replies to this topic

#1 CL Rods

CL Rods


  • TU Member
  • PipPip
  • 282 posts

Posted 26 November 2008 - 01:48 AM

Has anyone tried this epoxy product? Have you used it over Acrylics? Search pulls up no hits.

And which brand is your favorite Moisture Cure OR Automotive Clear that can be sprayed and source for it?

Edited by 76gator, 26 November 2008 - 01:51 AM.

#2 RiverMan


    Advanced Member

  • TU Member
  • PipPipPip
  • 1,983 posts

Posted 26 November 2008 - 05:11 PM

The auto clears seems to be one area that most builders here have not experimented much with......me included.


#3 KcDano


    Advanced Member

  • TU Member
  • PipPipPip
  • 810 posts

Posted 26 November 2008 - 05:59 PM

There are plenty of urethane clears on the market that will work for finishing lures. ppg, dupont and numerous other brands sold at auto part stores. The one thing to keep in mind is some clears will not stick well to a lure if it isn't clear-coated within a certain time frame. To remedy this you would need to use a intercoat clear. Some people have no problem with this, but I have seen some clears that fail to adhere to the underlying paint if too much time expires between color coating and clear coating. This is with lacquers and base coat colors under 2-part urethane clear