borderbasser Posted January 9, 2009 Report Share Posted January 9, 2009 Does anyone have any experiece using OOMOO from Smooth-on for pouring lead? I know that the platinum cure RTV is a better choice, but I already have some of the tin cure OOMOO. I am needing to pour some swimbait harnesses and won't be making a lot of them anyway. Will this stuff hold up to the heat of say about 20 harnesses? Thanks guys. TJ Quote Link to comment Share on other sites More sharing options...
redg8r Posted January 10, 2009 Report Share Posted January 10, 2009 Does anyone have any experiece using OOMOO from Smooth-on for pouring lead? I know that the platinum cure RTV is a better choice, but I already have some of the tin cure OOMOO. I am needing to pour some swimbait harnesses and won't be making a lot of them anyway. Will this stuff hold up to the heat of say about 20 harnesses? Thanks guys.TJ Hi TJ, I think you will be OK. I used it to pour some thick & heavy dolphin/dorado jigheads & got about half a dozen pours before the oomoo mold distorted. Give some time between pours to let the silicone cool down. omoo isn't ideal, but again, for short runs you should be ok. Quote Link to comment Share on other sites More sharing options...
borderbasser Posted January 10, 2009 Author Report Share Posted January 10, 2009 Thanks Red, I'll give it a shot. TJ Quote Link to comment Share on other sites More sharing options...
