Jump to content
presto pot question
3 replies to this topic
Posted 14 March 2009 - 08:18 AM
I'm ready to put together a pot and was wondering do you guys use teflon tape on the threads when you assemble the valve or some other type of sealer. Thanks for any assistance you can provide.
Posted 14 March 2009 - 03:56 PM
I don't know if it's necessary but I used it on mine where the fitting threads into the pot.
Edited by Dave926, 14 March 2009 - 03:58 PM.
Posted 14 March 2009 - 04:46 PM
When I built mine I did not use any sealer tape or compound of any sort. The plastic is a little too thick to seep it's way through the threads. Have not seen any leaks from around pot or the fittings. Hope that helps.