rhahn427 Posted April 4, 2009 Report Share Posted April 4, 2009 Hope someone can point me in the right direction. I'm making some huge spinner baits for large stripers and I need clevises that will fit .090 stainless steel wire but I can't find them. So far I've had to buy the biggest I can find and drill them out to where they only have a very thin bit of metal left. Seems like the biggest is about .08 to be used for .061 wire Any help is appreciated. Quote Link to comment Share on other sites More sharing options...
rhahn427 Posted April 4, 2009 Author Report Share Posted April 4, 2009 This post never appeared in the new posts section ....... can anyone explain why? Quote Link to comment Share on other sites More sharing options...
fatfingers Posted April 5, 2009 Report Share Posted April 5, 2009 Having you considered trying to fabricate your own from stainless steel wire? Quote Link to comment Share on other sites More sharing options...
hazmail Posted April 5, 2009 Report Share Posted April 5, 2009 Try a P.M to Bruce 'Spike a Pike', he makes some beauties which are quite large, with clevises about 1" or more long.pete Quote Link to comment Share on other sites More sharing options...
jamie Posted April 5, 2009 Report Share Posted April 5, 2009 You should repost this in the wire bait forum, Im sure those guys can help. Im like you I always ended up drilling mine. Quote Link to comment Share on other sites More sharing options...
