Jump to content
flexcoat / enamel
3 replies to this topic
Posted 18 July 2009 - 05:05 PM
i would like to apply testors enamel over flexcoat / visa versa. does anyone think this is a bad idea / is there anything i can not apply flexcoat over?
also - is the highbuild formula really thick compared to the lite build. i have never used flexcoat before but i like that you can buy preloaded syringes and i only make a few lures. thanks. scott.
Posted 18 July 2009 - 10:48 PM
Once epoxy has cured it is very resistant to solvents or other chemicals, so you should be OK.
Posted 20 July 2009 - 08:56 AM
Make sure you get the new Flex Coat Ultra V. Also let the flex coat sit after mixing for about 10 min and it needs to be turned for about 2hrs.