I am going to make my first resin 2 part mold and was wondering what you guys use to seperate the 2. Would I just follow the same directions as the plaster of paris?
 |
 3
Resin Molds
Started by
uwfishmd
, Aug 12 2009 09:56 AM
3 replies to this topic
#2
nova
Advanced Member Posted 12 August 2009 - 04:44 PM
The main problem with 2 part resin molds is the heat warping; both rom the curing stage and pouring baits. I only tried it once and could not get a good seal between the parts so there was a great deal on flashing when I poured. More trouble than it's worth.
 If you want to try it I would use a thin layer of vasaline as a release agent. www.novalures.com #3
uwfishmd
Member Posted 12 August 2009 - 04:49 PM
Thanks for the info.. I wouldn't want to waste resign when I can use in my boat.
 I would use POP but its a worm with a lot of small features on it and if I seal it it would just fill in. Who know maybe I can get it to work.
#4
Vodkaman
Advanced Member
Posted 12 August 2009 - 05:44 PM |
