Jump to content
jcarman

Bubbled topcoat

Recommended Posts

I have been making some topwater lures out of the white foamy looking lure bodies you can get from Hagens, Janns, etc.

Some of these bodies are a little prous, and even though I prime them, then paint them, when I put on the topcoat it seems like the bodies have small air pockets trapped in the porous areas and this leaves bubbles in my topcoat. Typically a second coat will fill in the bubbles and all looks OK, but I am waondering if there is something I can do to seal the bodies before I start painting and thus won't have to topcoat twice. Any advice?

JC

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top