Jump to content
Frchkn

New with a newbie question!

Recommended Posts

Well I am not new to airbrushig i am new to the forum and painting crank's and applying clears on them, I reconize Mark Poulson from westernbass I think I even sold him some drop shot wieghts!

I did a search but wasnt able to find anyhing I could buy at a hardware store?

My question is what would be a good all around clear/epoxy that I could purchase at lowes,home depot, or even ACE hardware.. I do not want to spend a fortune.. Just looking to give it a try. I would like osmething I could dip..

Link to comment
Share on other sites

Ace hardware sells Devcon Two Ton epoxy in a 30 ML double syringe. It's sold as a glue but is one of the favorite topcoats among crankbait builders. Brush it on, reverse the bait as it hangs every little while for 45 minutes so the epoxy doesn't sag. Do Not use Devcon 5 Minute epoxy. It cures too fast and will not work. Search on Devcon for tons of further info.

Link to comment
Share on other sites

Ace hardware sells Devcon Two Ton epoxy in a 30 ML double syringe. It's sold as a glue but is one of the favorite topcoats among crankbait builders. Brush it on, reverse the bait as it hangs every little while for 45 minutes so the epoxy doesn't sag. Do Not use Devcon 5 Minute epoxy. It cures too fast and will not work. Search on Devcon for tons of further info.

Thank you Bob, I appreciate the help.:yay:

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top