Jump to content
Fishwhittler

Molding Clear Baits?

Recommended Posts

Alumilite makes a clear but to make it bubble free you will need a pressure vessal. I have had some but the results are really not what I want yet.

Aero Marine has a "water clear" casting resin. I have not used it but have used other resins he provides with good outcomes. It takes longer to cure and costs more... if thats even an issue for you. Here's the link: http://www.jgreer.com/

Link to comment
Share on other sites

Aero Marine has a "water clear" casting resin. I have not used it but have used other resins he provides with good outcomes. It takes longer to cure and costs more... if thats even an issue for you. Here's the link: http://www.jgreer.com/

Thanks!

Are cast resin baits buoyant? Or do you have to add something to the resin to make them float?

Link to comment
Share on other sites

You will have to add something to make it float but in clear resin I do not know what you would use unless you can cast a air bubble in it. My thoughts on this is to make a mold that you do not fill up and then roll it till it cures. I saw Larry do this and it stuck in my mind. Wondering if it will make alot of bubbles though.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top