No replies to this topic

[Coosa Redeye]

Step 1: Gather Materials (mixing containers, stir sticks, resin, master, cheap storage container for mold box.)

Step 2: After securing master in the container, mix up the resin per instructions on container. Stir slowly to minimize bubbles.


Step 3: Pour slowly into a corner of the mold container, and allow the resin to flow over the master.

Step 4: Allow the mold to cure. The mold will get hot. It will cool as it cures. If you make the mold thick enough, shrinkage is minimized. The mold will be ready to use after a few hours. For best results, wait 24 hours. Enjoy.


Hope this helps.


The bait used for the master in this example was a lure I had near me at the time I decided to make this tutorial.