need help starting my own hardbaits..
7 replies to this topic
Posted 16 February 2004 - 11:06 PM
I can pour worms and such but recently have been very interested in making my own cranks or buying the bodies and doing everything else needed to finish a black body. Is there any web-site or own assembler here that knows of a site that sells packs of crank bait bodies unpanited and such? I really wanna start my owna ssemble line of cranks but need some help from the experienced.
Posted 16 February 2004 - 11:52 PM
bout the best advice I think I could tell you is to start by reading back through all the posts here, They are some of the most informative and well written stuff I have seen, many would answer all the questions you have, from shaping bodies to top coat, its all here with links. Best to just start wading through it and coppying all stuff that applies to a folder for quick reference later. OR you can use the search to search by keyword, ie BODIES or weighting, etc...
welcome to you new addiction!
Posted 17 February 2004 - 12:01 AM
thanks for your reply, did'nt even think of searching through the archives. Thanks again.
Posted 17 February 2004 - 01:04 AM
this might be a stupid question, but how do i search the acrhives?
Posted 17 February 2004 - 01:44 AM
There's a "Search" link at the top of this page just below the Tackle making tutorials link.
Posted 17 February 2004 - 02:17 AM
Here is a couple of tutorial links that will give you a good "foundation". Warning, this hobby is very addictive!!
I tried to paste Chip's link too but the links I had saved aren't working.