10 replies to this topic
Posted 21 March 2010 - 09:04 PM
hey everyone kinda new to the bait painting scene and got a few questions got several baits i would like to paint the gold chrome that was on the old bagleys but having tough time getting any thing to look good i have foiled baits sprayed with various transparents and pearls started with chromed baits with alittle bit better results didnt know if there is a better way or definately a better looking out come any help would be appriciated thanks
Posted 23 March 2010 - 12:09 PM
There is a product that some are using called Brite Bak. Its a tape that is used on leaded glass for reflection purposes. BobP uses it I believe so check with him.
Also you can use a "VERY FINE: glitter to achieve some results that are pleasing.
Posted 23 March 2010 - 12:21 PM
You can use gold leaf and sizing to achieve the results you're looking for
Posted 23 March 2010 - 01:34 PM
I think BobP told me that Brite Bak makes a gold colored foil.
Posted 23 March 2010 - 07:40 PM
hey thanks for the help there is something about the chrome gold the fish seem to like will the gold leaf give that solid look like the wiggle warts , bagleys etc. or is it more flaky lookn again thanks for the help
Posted 23 March 2010 - 09:27 PM
If you've been foiling baits something you might try is applying a silver foil and then spraying a candy gold over it.The silver foil should give you the reflective quality and the candy gold should give you the color your looking for.
Edited by RayburnGuy, 23 March 2010 - 09:28 PM.
Posted 23 March 2010 - 09:42 PM
I like Venture Brite-Bak foil tape, but haven't seen the Bagley color you refer to. The gold Brite-Bak is actually more brass color and I prefer using the silver foil and overspraying it with transparent yellow Createx to get a bright yellow gold metallic. I think you can probably play with the silver to get a more subtle gold color value, if that's what you're looking for. Brite-Bak is thin with good adhesive backing and it conforms well to 3D detail on plastic baits, or takes scale embossing well on wood baits. Its margins are unobtrusive. Here's where I got some but there are other online sources: http://www.sunshineg...access-vent.htm
Posted 26 March 2010 - 05:33 AM
I know this isn't about Gold baits, But I wanted to know if someone could tell me How and What I would need to Foil baits? I'll take any info. Thanks a lot guys
Posted 26 March 2010 - 09:39 AM
Here's a link that has some pretty good info, complete with pictures, about several aspects of lure refinishing, foiling, painting, etc.
Posted 28 March 2010 - 08:07 AM
again thanks for all the info the baits i have are the older bagleys a couple have the brassy looking gold the others have a lighter gold tone i have been using furnace foil tape because the adhesive is already there and then spraying with transparent gold havent tried any of the candy colors yet gonna have to order some the gold seams to look like what i want when i over load the bait with laquer its like the flake suspends in the laquer but settles by the time it dries have tried several layers with a little better success but i am going to try the advice and see if one gives me the look again thanks
Posted 28 March 2010 - 07:31 PM
Once you put the silver foil on, will the paint stick to it , or do you have to do something to it, before you paint it? thanks for the good question. Doug