Jump to content
CatchemCaro

Sealing Wood Lures

Recommended Posts

Just wondering what others are using to seal the wood before painting and clear coating?

Rich

minwax wood hardner.. you can brush it on or dip it and let it soak. I do this after I have put in screw eyes then remove and drill ballast holes in bottom. After sealer is dry I then epoxy in my weights and screw eyes. Seems to work great.

Edited by Toxicbaits
Link to comment
Share on other sites

minwax wood hardner.. you can brush it on or dip it and let it soak. I do this after I have put in screw eyes then remove and drill ballast holes in bottom. After sealer is dry I then epoxy in my weights and screw eyes. Seems to work great.

I also use minwax wood hardener. It seems to protect the wood well, hold screw eyes better and you can sand it real fine to get a good smooth paint job.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top