Edited by FLASH, 27 November 2011 - 05:12 AM.
Any homemade lure making machines?
133 replies to this topic
Posted 27 November 2011 - 06:33 AM
No one is going to give you plans, as it is basically using a motorized tool for a purpose not intended. Designing and building one is not that difficult, it just requires a lot of thought and an understanding of how it works. I suggest study all the videos and pics and ask lots of questions, I and many others will be glad to help you along, just promise no legal action.
Posted 24 January 2012 - 12:01 AM
I made a copy lath to cut my lures with and so far Ihave probley cut 2000 lures with it with out any problems except the cuttergetting dull If any one wants to know let me know and I will post some pic and how to make it
Posted 24 January 2012 - 08:23 AM
It would be interesting to see what you have!
Posted 24 January 2012 - 10:31 AM
please let us see your Machine!
Posted 24 January 2012 - 02:39 PM
Here are some pics of my lure mechine also some of my drier P1240006.JPG 252.08KB 488 downloads P1240008.JPG 271.34KB 608 downloads P1240009.JPG 241.55KB 556 downloads P1240010.JPG 185.56KB 534 downloads P1240011.JPG 204.53KB 501 downloads P1240012.JPG 193.92KB 484 downloads P1240013.JPG 243.01KB 499 downloads P1240007.JPG 271.63KB 408 downloads
if some one wants to build one I will help you as much as I can
Posted 27 January 2012 - 09:29 AM
Reaper - interesting solution to the lure holder on the drier. Good share.
Posted 21 September 2013 - 09:10 AM
What kind of machine is that they stick the balsa blanks into and it turns the lure for u? I think u program the design and it just does the rest. I have seen them on youtube and was wondering what they cost and where u would buy them?
Posted 31 October 2013 - 12:38 PM
Thinman, that's the million dollar question. That's also part of the reason why people are just building them.
Posted 28 December 2013 - 09:31 PM
I make or have made a lot of the machines I use to build lures. Some noteables are:
A mini wood lathe from an old sewing machine
An epoxy mixer using some PVC parts and a BBQ Rotisserie motor
An epoxy drier using a Ronco Showtime rotisserie
and a powder coat fluid bed using assorted air fittings and PVC pipe
Some, like the lathe, while they worked well, have been since replaced. Others, like the driers and mixer, etc I still use nearly every day.
I am far too cheap to spend the silly money these places charge for their stuff when I am more than capable of building my own lol.
Posted 30 June 2014 - 07:30 PM
guys you can cut bodies on a cnc machine..........they will be 2 part bodies.......one will run around 3 grand for them and they do a gr8 job