Jump to content
6 replies to this topic
Posted 21 July 2010 - 05:46 PM
What would be the best way to paint a thin line down the side of the bait? Besides free hand or using tape. Thanks!
Posted 21 July 2010 - 07:15 PM
MDB; I use stencils made from the flat portions of various bubble paks. I cut them with an exacto and a metal straight edge. Other shapes can be used for curves. They can be used repeatedly once you've gone thru the pain of making them. I am not sure how many guys have the talent to make precise lines freehand. It sure isn't me. Good luck.
Posted 22 July 2010 - 10:38 AM
I use a cheap comb as a stencil. Large variety at any Dollar type store, approx .99 each, different sizes and teeth sizes.
Posted 22 July 2010 - 04:23 PM
If it's a color I have in a sharpie, I use a straight edge or something curved like I want as a guide, and use the sharpie.
Or I free hand it. It's a lot easier to free hand a line with a sharpie than with an air brush, at least for me, since I'm not an accomplished painter.
Posted 23 July 2010 - 07:05 PM
easy stencil idea...this is what i did...go to the craft section at walmart and they have blank stencil sheets..3 or 6 in a pack..pick up a wood burning tool there also for 10 bucks...heat up the tool and make your own stencils...it works great!!!!!!!!
Posted 26 July 2010 - 01:32 AM
could you elaborate on this or show pics of what it is your saying