Jump to content
6 replies to this topic
Posted 25 July 2010 - 04:24 PM
so was cleaning my tips on my paasche airbrush and lost my set screw any one have any ideas how to hold my needle in cone in place now
Posted 25 July 2010 - 04:34 PM
You can always go to your local hard ware store with your air brush and fit a screw to it, or just order one directly from Paasche.
Posted 25 July 2010 - 04:54 PM
Hardware store or auto parts store would be cheaper. You may have to ask auto part store though they usually keep those in back.
Posted 25 July 2010 - 05:48 PM
this is a very small round screw only about 4 threads and take allen wrench and i have orders to fill cant wait on shipping. Do hardware store sell these mall screws
Posted 25 July 2010 - 08:14 PM
If hardware or autoparts store don't have it maybe a electricians or tv VCR repair place. Other than that idono
Posted 26 July 2010 - 09:11 AM
A real hardware store or lumber yard should have them. You might also try a locksmith, because those kinds of set screws, both imperial and metric, are used a lot in door locks.
Have you gotten you Diamond finish yet?
I'm dying to know how it works.
Posted 26 July 2010 - 04:27 PM