I figure its something along the same lines as when you put a felt tip pen on paper and let the ink spread out.
100729-0027.jpg 38.39K
189 downloads
How Do You Do This ?
Started by
Kris
, Jul 29 2010 06:52 PM
9 replies to this topic
#1Posted 29 July 2010 - 06:52 PM
Was wondering how you accomplish this look ?
I figure its something along the same lines as when you put a felt tip pen on paper and let the ink spread out.
100729-0027.jpg 38.39K
189 downloads
#2Posted 29 July 2010 - 09:27 PM
I think Pete (Hazmail) gave a "how to" on something like this. You might do a search of his posts to see if you can find it.
#3Posted 29 July 2010 - 10:07 PM
Wasn't easy to find: http://www.tackleund...ok/page__st__20 post No 32.
Here is a vid that was posted by Spoopa: different technique, with a slightly different effect. Dave #4Posted 30 July 2010 - 08:22 AM
Wow!! That opens up a whole new type of painting plugs that I had never thought about. Just have to be careful not to move the plug until it is dry.
#5Posted 30 July 2010 - 10:34 AM
Do you think the Water Droplet Effect (as shown in the YouTube vid) would would with water based paints?
Since you are using water to gain the effect and then spraying a water based paint onto the water droplets?? #6Posted 30 July 2010 - 11:16 AM
Do you think the Water Droplet Effect (as shown in the YouTube vid) would would with water based paints? Since you are using water to gain the effect and then spraying a water based paint onto the water droplets?? Good question. First thoughts would be no, because the paint is water based, it would dissolve into the droplet. But you have to think deeper and understand the paint. My guess would be that it has a chance. The paint pigments are solids, so such tiny fragments should not pierce the surface tension of the droplet. I hope you try it and report back. I could be totally wrong. Dave #7Posted 30 July 2010 - 06:06 PM
Good question. First thoughts would be no, because the paint is water based, it would dissolve into the droplet. But you have to think deeper and understand the paint. My guess would be that it has a chance. The paint pigments are solids, so such tiny fragments should not pierce the surface tension of the droplet. I hope you try it and report back. I could be totally wrong. Dave I was thinking about the surface tension also, I think it should work really. #8Posted 30 July 2010 - 07:40 PM
I'm wondering what would happen if you thinned your paint quite thin, applied small drops of the thinned paint and then wrapped plastic wrap over it. If wrapping the plastic over it provided the random shapes it could be allowed to dry enough to remove the plastic wrap. Just letting the brain wander.
#9Posted 30 July 2010 - 11:33 PM
Do you think the Water Droplet Effect (as shown in the YouTube vid) would would with water based paints? Since you are using water to gain the effect and then spraying a water based paint onto the water droplets?? Kris - I think you will find the 'water droplet's' is done with enamel paint, not sure weather thinners based or oil based, but suspect thinners, the pigment spray would float on the drops and drop around the sides - Oil based enamel would also float on the droplets and probably drop, BUT would take ages to dry. .Pete #10Posted 13 August 2010 - 07:07 AM
I'm wondering what would happen if you thinned your paint quite thin, applied small drops of the thinned paint and then wrapped plastic wrap over it. If wrapping the plastic over it provided the random shapes it could be allowed to dry enough to remove the plastic wrap. Just letting the brain wander. Depending on the base coat and whether it is durable enough or if you have put an intermediate clear on it, the technique you just mentioned is how you create a marblized paint job. However, you do not let it dry under the plastic and you pretty much remove it right away. HOK makes a thinned silver pearl paint just for doing this and it works absolutely as advertised. |