19 replies to this topic

[Saffie]

I am trying to find out if any one on this forum knows if this lure is still being made or knows how to make it. It was marketed by Lazy Ike. It is like a jig that has a metal lip cast into the lead. I have searched the net but nothing came up. Thanks for the help.

[RayburnGuy]

Diemai would be the one to talk to about the older lures. He knows of quite a few websites with information anout a lot of the antique and discontinued lures. He'll probably chime in when he sees this post.

[koop]

I remember the lure (I think my brother still has one). I don't know that it's still being made, but what I remember it looked like a spinner blade mounted in the front of the jig head with a hole for the line tie. It originally came with a 5-6" rigged black worm on the back. It seems like it wouldn't be too hard to duplicate (I think my brother tried making a few). If you want I can try to get a picture of one from him (I'm sure he has it yet). You would have to modify a jig mold so the blade could be cast into the head and tied to the hook.

Kent

[Piscivorous Pike]

[quote name='koop' timestamp='1282189157' post='151379']
I remember the lure (I think my brother still has one). I don't know that it's still being made, but what I remember it looked like a spinner blade mounted in the front of the jig head with a hole for the line tie. It originally came with a 5-6" rigged black worm on the back. It seems like it wouldn't be too hard to duplicate (I think my brother tried making a few). If you want I can try to get a picture of one from him (I'm sure he has it yet). You would have to modify a jig mold so the blade could be cast into the head and tied to the hook.

Kent
[/quote

I would like a picture, Please!

I have tried making something like it but have had no success because I do not remember it clearly. I did not realize it was Lazy Ike so was unable to google it up.

My parents, circa 1950, used Lazy Ike product all the way to the 1960's for Walleye, Northerns and Small Mouths and I remember it, but not clearly, unfortunately it is one part of the estate that did not get past down.

It would be fun to build it and use an old pattern again. I like old baits to fish with, something about the ruggedness built into them I find attractive.

Thank You,

PP

[koop]

I'll get an email off to him to see if he still has it and can get a picture(he has the "misfortune" to live in Hawaii now). I'm pretty sure he does, hopefully I can get him to get back to me soon.

[Vodkaman]

Amazed that a picture is not available on the web. I could not find one either. I found an ebay sale from 2009, $22.50, but no pic.

Dave

Edited by Vodkaman, 19 August 2010 - 08:58 AM.

[RayburnGuy]

This is the best I could come up with. Apparently it's a picture of the package the lure came in with a picture of the lure on the box.

Attached Files

•  Lazy Ike Wiggly Jig Crawler.jpg   26.68K   92 downloads

[JSC]

RayburnGuy, on 19 August 2010 - 02:02 PM, said:

This is the best I could come up with. Apparently it's a picture of the package the lure came in with a picture of the lure on the box.

That is the lure, but I think that Pix came from an AD ?? I rember the Lure being in a "bag" .. I only had one of them back in the "50's" when soft plastics were first on the "move" and this was an early "Shot" at the market .. I never did a lot with it (remember catching a Big Blue Gill on it off of a ledge in Lake Martin Alabama the "Stinger Hook" got him)

Had a great action.

2 cents worth
JSC

[JBlaze]

Saffie, on 18 August 2010 - 06:03 PM, said:

I am trying to find out if any one on this forum knows if this lure is still being made or knows how to make it. It was marketed by Lazy Ike. It is like a jig that has a metal lip cast into the lead. I have searched the net but nothing came up. Thanks for the help.

NOt sure, but I think I have one of these still in the package. A friend gave it to me a few years ago to try and duplicate. I was semi-successful but not really happy with the results. So I put it away for a rainy day. Havn't thought about it since. I will try to find it and post a pic in the gallery.
John

[Uncle Grump]

Saffie

Take a look at the Berkey Blade Dancer - it has a profile similar to the pic that was posted.

UG

[Romeo D]

I remember seeing a post on here with a video of something very similar last year. It looked like a small Colorado blade with a ball shaped lead weight attatched on one end with an attached hook. That thing really moved well in the water.

[Saffie]

Thanks for all the responses to my post. I am originally from South Africa and got hooked on this lure there. It has a killer action, especially with a long ribbon tail worm. It is also fairly snag resistant as the blade makes the hook ride over obstacles. i will keep searching though and might try my hand at making them. Cheers,

[Saffie]

Well I went ahead and made one. Used an Indiana style blade, Gamakatsu spinnerbait hook and my Shekey head jig mold for the head. I flatened out the blade and threaded the hook through the hole in the blade. The flat blade and hook actually fit in the mold pretty well. I then just poured the molten lead on either side of the blade to pour the head. Took a couple of tries to get it to our just right. The head was still a little loose on the blade, but I used some solder and a coat of powder paint to cure that. I will post some pictures on the Gallery page.

[Vodkaman]

Romeo D, on 23 August 2010 - 11:33 AM, said:

I remember seeing a post on here with a video of something very similar last year. It looked like a small Colorado blade with a ball shaped lead weight attatched on one end with an attached hook. That thing really moved well in the water.

I remembered that thread. It took some finding!

http://www.tackleund...__1#entry117245

Hope this gives some ideas.

Dave

[Romeo D]

Vodkaman, on 23 August 2010 - 09:27 PM, said:

I remembered that thread. It took some finding!

http://www.tackleund...__1#entry117245

Hope this gives some ideas.

Dave

Amazing work Dave the "Thread Detective", That was the exact thread I remember!

[JBlaze]

Saffie, on 18 August 2010 - 06:03 PM, said:

I am trying to find out if any one on this forum knows if this lure is still being made or knows how to make it. It was marketed by Lazy Ike. It is like a jig that has a metal lip cast into the lead. I have searched the net but nothing came up. Thanks for the help.

Saffie, I finally found it hope this helps you. The blade does look like an Indianna blade, but it is still cupped and not flattened. It also looks like the blade and hook may have a pin running through them not sure about that it could be marks from the machining of the mold. Hope this picture helps you in some way. John
http://www.tackleund...-of-a-lazy-ike/

Edited by JBlaze, 28 August 2010 - 09:59 PM.

[Saffie]

JBlaze, on 28 August 2010 - 09:53 PM, said:

Saffie, I finally found it hope this helps you. The blade does look like an Indianna blade, but it is still cupped and not flattened. It also looks like the blade and hook may have a pin running through them not sure about that it could be marks from the machining of the mold. Hope this picture helps you in some way. John
http://www.tackleund...-of-a-lazy-ike/

Thanks John,
That is the lure. The one I made does not have the cupped side, but still works pretty well. I had to flatten it out so it would fit in my Shakey head mold. I will try to get some video of the action posted. Looks pretty good coming through the water. Thnaks again for the pic.

Cheers,
Desmond

[JBlaze]

Reading this thread got me wanting to take another stab at making another version of the Lazy Ike. My first version was a 3/8 oz silicone round head mold, I was very disapointed in it,it just didn't have the action that I thought it would. As Koop Sugggested, This second attempt was made by modifying a 3/4 ounce Do-It spinnerbait mold to accept the blade. The blade and hook are pinned together with a brass pin before being inserted in the mold.I drilled a 1/8 inch hole in the blade directly in front of the pin so that the molten lead would go through the blade and anchor it securely inside the head. (I don't think it will come apart)The hooks are spinnerbait hooks, front hook is a 5/0 rear is a 3/0. I poured three of them this morning. One with a concave facing blade and one with a convex facing blade. Also one with a painted blade. Can't wait to get them in the water to see how or if they will wiggle, waggle, rock and roll!
Pics posted in the gallery.
John

http://www.tackleund...kalike-006ajpg/

Edited by JBlaze, 01 September 2010 - 08:40 PM.

[JBlaze]

Hey fellows, I finally got a chance to try out the Worm Wiggler. The one with concave surface facing forward works very well. It starts wiggling at a slow pace and stays down.
The one with convex surface facing forward works as well but it has to be retrieved at a faster pace to start its wiggle and it also wants to climb to the surface when retrieved. I tried to take a video of it at the lake but it didn't show up very well because of the glare so I made a video in the old faithful bath tub. Hope this link works. Click on pic and it should pop up.
John

Edited by JBlaze, 08 September 2010 - 08:19 PM.

[RayburnGuy]

Looks like you nailed it John. It's got a great swimming action. There was another apparatus that had pretty much the same action and I can't for the life of me remember what it was called and I can't find either of the two that I had. It was just a thin strip of metal approximately 1/4" wide that was bent into a sort of lazy "S" shape. It had a hole drilled into one end for a line tie and a hook was pop riveted into the other end for a plastic worm to be slid onto. We used to thread a rubber band through the line tie hole and then hook the other end of the rubber band onto the barb of the hook to make it weedless. They were really popular on Toledo Bend a number of years ago.